Philips - Benedickte
02-08-2013, 01:45 PM
Hi all.
The new FW is now live. This thread is for technical feedback only. For other discussions please post in the discussion thread (http://www.supportforum.philips.com/en/showthread.php?9535-Experience-Thread-FW-150-81-for-6-7-8-9000-Series-2012&p=47470#post47470).
(http://www.supportforum.philips.com/en/showthread.php?10721-Experience-Thread-FW-150-83-for-6-7-8-9000-Series-2012&p=51667#post51667)Note: All posts need to be approved in this thread, meaning it will not be visable before this is done. No need to repost if not come live.
IMPORTANT: After upgrading your TV, it is necessary to perform a "cold start". This means that, after the TV is running again (after the update), shut down the TV, wait 1 minute (till all components are shut down), and unplug the TV from the mains (pull power cord) for 2 minutes before starting again.
Changelog:
T911E_2.18 (Date published: 2013-02-06) – before 2.15
T912E_2.09 (Date published: 2013-02-06) – before 2.07
T913E_2.13 (Date published: 2013-02-06) – before 2.10
T921E_2.15 (Date published: 2013-02-06) – before 2.12
T922E_2.11 (Date published: 2013-02-06) – before 2.08
T923E_2.16 (Date published: 2013-02-06) – before 2.13
T933E_2.04 (Date published: 2013-02-06) – before 2.02
[*=1]Improved channel switching time for DVB-S channels. (Only applicable to country, Turkey)
[*=1]Fixed Romania DVB-C teletext issue
Please use the following template in this thread.
Off topic posts regarding the firmware will be moved to the discussion thread (linked over).
============================
TV Model:
Previous Firmware:
Positive:
+
+
+
Negative:
-
-
-
============================
Best regards,
Benedickte
The new FW is now live. This thread is for technical feedback only. For other discussions please post in the discussion thread (http://www.supportforum.philips.com/en/showthread.php?9535-Experience-Thread-FW-150-81-for-6-7-8-9000-Series-2012&p=47470#post47470).
(http://www.supportforum.philips.com/en/showthread.php?10721-Experience-Thread-FW-150-83-for-6-7-8-9000-Series-2012&p=51667#post51667)Note: All posts need to be approved in this thread, meaning it will not be visable before this is done. No need to repost if not come live.
IMPORTANT: After upgrading your TV, it is necessary to perform a "cold start". This means that, after the TV is running again (after the update), shut down the TV, wait 1 minute (till all components are shut down), and unplug the TV from the mains (pull power cord) for 2 minutes before starting again.
Changelog:
T911E_2.18 (Date published: 2013-02-06) – before 2.15
T912E_2.09 (Date published: 2013-02-06) – before 2.07
T913E_2.13 (Date published: 2013-02-06) – before 2.10
T921E_2.15 (Date published: 2013-02-06) – before 2.12
T922E_2.11 (Date published: 2013-02-06) – before 2.08
T923E_2.16 (Date published: 2013-02-06) – before 2.13
T933E_2.04 (Date published: 2013-02-06) – before 2.02
[*=1]Improved channel switching time for DVB-S channels. (Only applicable to country, Turkey)
[*=1]Fixed Romania DVB-C teletext issue
Please use the following template in this thread.
Off topic posts regarding the firmware will be moved to the discussion thread (linked over).
============================
TV Model:
Previous Firmware:
Positive:
+
+
+
Negative:
-
-
-
============================
Best regards,
Benedickte