PDA

View Full Version : MCI500H Alarm settings



Krupion
02-10-2013, 12:31 PM
Hello, I have an MCI500H /05 and I would be grateful if anyone could let me know if they discovered the timing setting for the Alarm. I know how to set the Alarm and the machine will start but never stop automatically after say , 1h ..
The manual for MCi500H/05 and MCi500H/12 downloaded from Philips site does not even mention setting up the Alarm, thank you

Oscar
02-11-2013, 01:26 PM
Interesting but maybe the alarm will only turn the device on and you have to switch it off yourself.....
btw bit difficult to read like this....

Krupion
02-11-2013, 03:01 PM
Interesting but maybe the alarm will only turn the device on and you have to switch it off yourself.....
btw bit difficult to read like this....

yes, it certainly does start and then I have to stop it manually..I am just a little puzzled as I have a series of radio/CD players/tape player units and all have Alarm settings with a proper start and stop times ...

lucas1970
02-12-2013, 08:19 AM
Hi, as far as I can recall this is normal behaviour on this set...

When I had it I was facing the same but liked it as I had to get out of bed and I was sure not to fall asleep again :)

Philips - Katerina
08-24-2015, 10:49 AM
Hello participants of the thread and forum members in general!

Hopefully your issue was dealt with and you are no longer facing it. Since the thread has been silent for some time now, I will proceed by closing it. If you still have the same question about the same issue or any similar issues arise feel free to start a new thread or contact one of us moderators to open this thread again.

Kind regards
Philips Katerina