PDA

View Full Version : Fast quitting of Net TV results sometimes in TV reboot



Toengel
04-01-2011, 06:47 PM
Dear Philips,

sometimes when I quit fast Net TV with the top button of the outer circle of the remote cursor (that means if the webpages are not finished with loading) my TV stops working or even reboots. Sometimes the TV receiption is broken and no broadcast can be seen and no audio is present. Even when I try to switch the channel, nothing happens. This happens more often, if I try to exit Net TV from e.g. Open Internet with the abovementioned top button (pressing it two times: one to exit Open Internet, one to exit Net TV).

I think this has something to do with the PIP video stream. For both Open Internet and the Net TV Home the PIP module is loaded. And if I exit both pages really fast, the firmware comes to an undefined state that results in a reboot or failure of the TV (e.g. Amiblight goes to white).

Does anybody had in the past such experiences?

Toengel@Alex

Adamo
04-01-2011, 07:14 PM
Hi Toengel,

it happened to me too. Twice (once with this fw rev. and the other with the previous one)
My tv is 32pfl9705h.

Adamo

cp125
04-01-2011, 07:50 PM
It happend to me too. My TV is 37pfl7675

smart
04-01-2011, 09:04 PM
Hello,

I can confirm that behaviour for my 42PFL7695K/02 firmware 0.140.32.0. I had this problem sometimes, screen was black afterwards, browse DLNA Media Access worked, but no TV program could be watched. I'm only using DVB-C signal.

I did not post this issue until now, since I could not figure out which exact circumstances lead to that behaviour. But I left NetTV with pressing the top key of the outer buttons very fast.

Only shutting the TV down and restart made the TV work again.