PDA

View Full Version : Blinking red light and fireware upgrade



Alex33
06-02-2011, 02:05 PM
Hello everyone, when i start my 32PFL5403H tv, after 30 minutes it shut down and the red light is blinking. According to the manual, it means that the TV is to hot...

I tried to upgrade the firmware, hoping that the problem was not hardware. I unziped the firemware upgrade file on the root of my usb key and plugged it on my TV but the file is not detected. I tried to start the TV with the remote ok button pressed but in the software upgrade screen, no upgrade is detected.

Does this update file is corrupt ? Can i found an other firmware somewhere ?
Thanks for your answer.

Alex

My current software info is :
Q522E_0.64.79.0
Release fo TV520 R1
Q522E-0.64.79.0
Generation date :
12/22/2009 11:01:10 AM

Toengel
06-02-2011, 02:10 PM
Hi,

use a small usb stick, format it with FAT, extract the autorun.upg in the root (don't have other files on the stick). Switch on TV, plug in USB stick, upgrade...

Toengel@Alex

Alex33
06-02-2011, 03:32 PM
Hey, I tried with 2 different keys, both formated in FAT32. I try again in Fat. Ty!