PDA

View Full Version : New Firmware



john10000
08-28-2011, 05:05 PM
For the 7000 series

http://dl.dropbox.com/u/39302754/FUS_Q5551_0.140.40.0_prod.zip

Instalation instructions: http://goo.gl/WdXJl

Rogier1975
08-31-2011, 07:42 PM
For sure this is also for 7000-series? The link mentions '46PFL8605H'...

john10000
09-01-2011, 06:29 AM
Phillips Consumer suports sent the download link to me to resolve the problems with NetTV.
I have a 37PFL7605H/12, so i think it must work for the 7000 range.
Maybe it also works for the 8000 range !
In the firmware release the speak about "Solution for 32PFL7605H/60, 40PFL8605H/60" also the 7000 and the 8000 range.

Annyway NetTV works fine now 8-)

exitido
09-02-2011, 09:54 PM
I can confirm that works in a 7605 tv but i dont see any changes

bta
09-03-2011, 06:33 AM
Hi, yes it works in a 7605 but there is a very important change in the .040 SW: NetTV runs without any login problems. BTW this was the reason for the new SW.
(maybe you find no change because you don't use NetTV or you run on a older SW; something before .037 or so.)

Regards
Bta

rainh
09-03-2011, 08:44 AM
Question to Philips :

Is it possible to use this 8000-series upgrade for my 7605-TV
without!!! problems ?
I am waiting and waiting,
but there isn't a .040 available for 7605-TV's.

If this 8000 series upgrade works for 7000-series
Philips should say this.

Thanks to Philips.

john10000
09-05-2011, 07:12 AM
Question to Philips :

Is it possible to use this 8000-series upgrade for my 7605-TV
without!!! problems ?
I am waiting and waiting,
but there isn't a .040 available for 7605-TV's.

If this 8000 series upgrade works for 7000-series
Philips should say this.

Thanks to Philips.

As you can read ,the software has tested in the 7000 series and work well (i got it from Phillips esspecially for my 7605H ).
So its a 7000 and a 8000 software upgrade, The only difference between the older firmware is that they resolve the problem with NetTV.
The official upgrade will come begin or half september .

john10000
09-06-2011, 10:52 AM
How to install the firmware (becourse it wont work the regular way)

download the new firmware ( http://dl.dropbox.com/u/39302754/FUS_Q5551_0.140.40.0_prod.zip )
extract to the root of yourUSB stick (with Winzip(c) or Winrar(c) )
Plug the USB stick in the TV
Go to configuration screen.
, software ,
and locale updates,
and just install !

Toengel
09-06-2011, 11:07 AM
Hi,

the firmware 140.40 is now official available for 7000 series...

Toengel@Alex

Philips - Mark
09-06-2011, 11:10 AM
The official release of software 140.40 for
the xxPFL7xx5H/xx range is now rolled-out
over the various support websites.

For example here (http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?ctn=37PFL7605H/12&slg=en&scy=GB)

Release notes and installation instructions are also provided.