PDA

View Full Version : 42PFL7696K12 Options Size



Joerg_L
04-07-2012, 11:26 AM
Hello,

i am watching TV over an external sat receiver with scart on Ext1.

I choosed in the options the screen to "auto zoom", this is the best format fitting the signal from the receiver.
But after zapping through the channels on the external receiver, the options changes mostly back to "super zoom".
i manually have to change this back to auto zoom.
It is very annoying to switch it manually back everytime.
Why doesnt it stores this option?

The TV is not in store mode in location.

best regards,
Joerg

Philips - Thomas
04-11-2012, 11:10 AM
Hi

What exactly did you set in the Receiver? Which Firmware does the TV have?
Which Brand/model is the Receiver you use?

Regards
Thomas

Joerg_L
04-11-2012, 05:05 PM
Hi Thomas,
my sat receiver is an inverto idl7000. it has no hd only sd.
in the options i can only set 16:9 TV or 4:3. It is at 16:9.

The tv has the latest firmware available.

problem is the super zoom is to large and all the people in the tv looks to thin.
at auto zoom everything fine.

at the other options in the tv the 4:3 is not correct.

if i open the menue from the satreceiver, it is not full picture and the tv changes the option again to fit it fullscreen, but switches not back to auto zoom after leaving.

Please can the next firmware update store this option permanently and change it not by itself.
If i say to the tv i want autozoom on EXT1 i want it permanently.

best regards,
Joerg

Philips - Thomas
04-24-2012, 07:33 AM
Hi

what happens if you set the TV to "Full Size" ?

Regards
Thomas

Joerg_L
04-24-2012, 06:27 PM
Hi Thomas,
i have the german menue...i dont know the english menue names,
i numbered the options from the top.
the first option
16:9 ok
4:3 to wide, not with the black bars on the side, zoomed to 16:9
the second option
16:9 ok
4:3 ok, with black bars on the side, perfect! but after changing back to a 16:9 channel, it jumps to the third option.
the third option
16:9 ok, but sometimes too height, it zooms the picture at the top and bottom, also the people were to thin then, it happens if i open the menu from the Sat Receiver for epg or something, and this is not full 16:9, the tv zooms the menu to full 16:9, but reverts the picture after leaving the menu not to the right 16:9 format.
4:3 to wide, not with with the black bars on the side, zoomed to 16:9
the fourth option
16:9 to small
4:3 too big, at right and left side ok, but at the top and bottom cutted
the fifth option
16:9 ok
4:3 to wide, not with the black bars on the side, zoomed to 16:9

the second option is perfect, but it changes always back after some zapping to the third option.
i manually have to change it back to the second option.

it is all too automatically, i want only one option (the second) and the tv NEVER change it itself.
The second option:
16:9 ok
4:3 with the black bars at the sides ok.
Pan and Scan the tv zooms it to 16:9 is ok
That will be perfect for me.

best regards,
Joerg