View Full Version : Station compaitibility
06-25-2012, 07:02 PM
I have a wacs7000 centre and station. I was offered a 7500 station by a friend - was just wondering will the 7500 station link up to the older wacs7000 centre
Yes, the WAS7500 will work just fine with your WAC7000, except for Album Art, it wont show unless you connect the WAS7500 to a WAC7500 or MCi500H.
06-27-2012, 10:31 PM
Thanks for reply
07-15-2012, 09:36 AM
On same subject as Fintanbob, I have WACS7500 and would like station but can't find. I have the possibility of obtaining MCI298. What do you think?
The newer MCi's (298 % 730) and all NPxxxx devices will work with a WAC or MCi500H Center, except for Music Broadcast and Music Follows Me.
If you can't find a WAS Station, I recommend one of the NP device, like the NP3700 or NP3900.
They've got much more stable and mature firmware than the MCi298/MCi730 IMO.
07-15-2012, 08:28 PM
Thanks for speedy and comprehensive reply.
My local store has offer on MCi298/05 at half-price and I'm very familiar now with idiosyncrasies of WAC7500, so I'll give it some serious thought.
Well, the MCi298 is not a Center, i.e. it does not contain any harddisk and therefore can't store / hold any music tracks. It's "just" UPnP Client/Renderer.
And to be honest, you'll be much more happy with one of the NP3xxx devices than the MCi730/MCi298 due to the rather buggy firmware in these two MCi devices.
07-19-2012, 01:22 PM
Thanks for advice.
Before I decide, do you know if MCi298 will display same track info' and artwork as my WACS 7500?
Yes, it will.
08-11-2012, 11:03 AM
I hope you are well.
In the end, I bought a couple of stations on ebay - WAS6050 & NP1100.
The NP1100 was easy to install and seems to do everything it should, but the WAS6050 was hard work. It's now eventually connected to my home network and linking with my WASC7500 and WADM, but it refuses to acesss internet radio - "internet server cannot be connected".
Also, I see the remote for WAS6050 has a "record" button. I thought perhaps that it might allow me to record WAS6050 aux input remotely to the WASC7500 hard disk, but it doesn't appear to function.
Any thoughts please? (pity the WAS6050 doesn't show album art)
I remember my WAS6050's only being able to access Internet Radio if the were explicitly set up with automatically assigned IP settings (via DHCP). Setting it up manually won't let it access Internet Radio.
As you have already found out, the Record-button does indeed do absolutely nothing :-/
08-13-2012, 10:28 AM
Thanks for advice - I will persevere.
By the way, if I had the WAS7500 station would it be possible to remotely start recording its aux input to the WAC7500 centre hard disk?
No, it is not possible with any of the WACS/MCi devices.
08-13-2012, 02:47 PM
Thanks again - your help is much appreciated.
Philips - Katerina
08-21-2015, 09:51 AM
Hello participants of the thread and forum members in general!
Hopefully your issue was dealt with and you are no longer facing it. Since the thread has been silent for some time now, I will proceed by closing it. If you still have the same question about the same issue or any similar issues arise feel free to start a new thread or contact one of us moderators to open this thread again.
Philips – Katerina