PDA

View Full Version : no tv guide available



1337ss
09-11-2012, 01:33 PM
Hey,

I have DVB-C reciver receiver and its connected with RCA cable to the 46PFL7007 TV.

when Im scanning the channels its not finding anything.

when I try pressing the TV Guide nothing is showing.


What might be the problem to this?


Thanks alot!

Philips - Benedickte
09-11-2012, 02:35 PM
Hey,

I have DVB-C reciver receiver and its connected with RCA cable to the 46PFL7007 TV.

when Im scanning the channels its not finding anything.

when I try pressing the TV Guide nothing is showing.


What might be the problem to this?


Thanks alot!

Hi 1337ss.

Welcome to the forum.

I just want to make sure i've understood you right.
You got an external digital receiver connected to you TV that you want to watch tv from?

If this is so you will not find any channels from searching for channels on the TV, as the TV then using it's built-in tuner.
To find channels please go on the right input where your receiver is connected and search for channels through this.

Best regards,
Benedickte

1337ss
09-11-2012, 05:27 PM
Hey,

Thanks for the fast answer,

so this is what I got

I connect the antena, one side to the wall and the other to the tuner.
then from the tuner, take the RGB to the TV.
http://up351.siz.co.il/up3/gzygomyeczt2.jpg (http://www.siz.co.il/)

I am in Yes company which from what I saw in the internet is DVB-C.


Thanks!

Philips - Benedickte
09-13-2012, 08:12 AM
Hey,

Thanks for the fast answer,

so this is what I got

I connect the antena, one side to the wall and the other to the tuner.
then from the tuner, take the RGB to the TV.
http://up351.siz.co.il/up3/gzygomyeczt2.jpg (http://www.siz.co.il/)

I am in Yes company which from what I saw in the internet is DVB-C.


Thanks!

Hi 1337ss.

Thank you for the explanation and a nice drawing.

For you to get channels, you need to add the external tuner you got as a device on the TV. Then go to that source and search for channels with the remote control for this.
When you've found channels on your tuner you will be able to see the programguide using the remote control for your tuner.

Best regards,
Benedickte