PDA

View Full Version : Philips 46PFL8605H restarts and red light blinking.



eyvindpt
10-14-2012, 02:40 PM
Hi,

i'am dealing since today morning with a strange behaviour of my TV, sometimes it shuts down, the red light blinks for a few seconds and then it turns on again automatically. Now it's doing this all 10 or 15 minutes

i already made a firmware upgrade and the procedure mentioned on the user manual for a similar issue (Switch the TV off and on again with the switch at the bottom of
the TV. Check if there is enough space for ventilation. Wait until the
TV has cooled down.)

but the problem seems to remain.

a help would be great...

best regards

Miguel Silva

Philips - Benedickte
10-16-2012, 03:43 PM
Hi,

i'am dealing since today morning with a strange behaviour of my TV, sometimes it shuts down, the red light blinks for a few seconds and then it turns on again automatically. Now it's doing this all 10 or 15 minutes

i already made a firmware upgrade and the procedure mentioned on the user manual for a similar issue (Switch the TV off and on again with the switch at the bottom of
the TV. Check if there is enough space for ventilation. Wait until the
TV has cooled down.)

but the problem seems to remain.

a help would be great...

best regards

Miguel Silva


Hi Miguel.

Welcome to the forum.

I'm sorry to hear you're having this behaviour with your TV.
Have you tried unplugging the TV from the mains fo a few minutes? If not, please do this and report back result.

Best regards,
Benedickte

eyvindpt
10-16-2012, 04:06 PM
Hi Miguel.

Welcome to the forum.

I'm sorry to hear you're having this behaviour with your TV.
Have you tried unplugging the TV from the mains fo a few minutes? If not, please do this and report back result.

Best regards,
Benedickte

Hi,

yes, i unplugged the tv from the electricity for a few minutes, i've restored the factory definitions, and even try to connect directly do TDT (terrestrial digital television) directly instead fo connecting it to cable tv box, nothing worked...

when the tv restarts the red blinks blinks 9X, i believe it might be an error code...

can you help?

Philips - Benedickte
10-16-2012, 04:11 PM
Hi,

yes, i unplugged the tv from the electricity for a few minutes, i've restored the factory definitions, and even try to connect directly do TDT (terrestrial digital television) directly instead fo connecting it to cable tv box, nothing worked...

when the tv restarts the red blinks blinks 9X, i believe it might be an error code...

can you help?


Hi Miguel.

Thank you for your quick answer.

With this information i would advise you to contact your local customer service for further assistance.

Good luck.
Best regards,
Benedickte