PDA

View Full Version : HDMI connection



pete16
11-06-2012, 02:13 PM
I have the hts9241/12 and the 37pfl6777h/12 - I live in France.
When the vendor installed the system he connected it to my sat rcvr via htmi - OK, then he connected the sound system and the TV via an htmi lead AND an optical cable.

Whilst this worked OK the optical lead kept falling out of the TV connection and losing the sound to the sound system. The Philips technician came to change out the printed circuit board that held the optical socket. In doing so - after three tries - he got a picture but the definition was terrible. He came back with another PCB but in changing that out he buggered the ribbon cable!! The TV is now back at his workshop. We have enjoyed a grand total of 2 hours of Philips TV since we bought both systems almost three weeks ago!!

I know this sounds a bit like the Flanders & Swan song "On a Monday morning the gas man came to call ...................." but my real question is why do I need an optical cable if I have a full hdmi connection?

Your comments would be appreciated.

Oscar
11-09-2012, 01:53 PM
They have both ARC so donīt get it...think optical is not needed

pete16
11-09-2012, 02:56 PM
They have both ARC so donīt get it...think optical is not needed
Thanks Oscar - I was hoping that I would not need the optical. Playing a Blue ray from the Sound system plays the video OK to the TV without the optical connection BUT the Sound coming FROM the TV TO the sound system does not seem to work without the optical. I think that there must be something in the set-up routines that needs to be done to make it work both ways without the optical cable. I hope that someone can tell me just what needs to be done.
Regards,

Oscar
11-10-2012, 07:20 AM
What I meant is to connect your tv via the HDMI to your HTS. As all HDMI connectors on your tv are ARC you can choose. For this part no extra audio cable is needed. As I dont know which connectiosn your sat. has cannot help you on that. COnnect it via HDMI to your TV also but the sound part again donīt know the connections. The HTS gives you various possibilities here though....

pete16
11-10-2012, 09:26 AM
Hi Oscar,
Thanks for your reply.
The optic cable is only between the TV and the sound system. My sat rcvr also has HDMI - not sure at what level - but it does an OK job of sending sound and vision directly to the TV.
The problem is between the TV and the Sound system both of which are ARC and as such SHOULD be compatible for both sound and vision. Does the HDMI ARC work in both directions - TV sound and vision TO the sound system AND vision FROM the sound system Blue Ray player TO the TV?
In my case it works with just the HDMI cable to transmit vision TO the TV but to get the sound FROM the TV to the sound system I need to use the optical cable.
Best regards,
P

Oscar
11-12-2012, 11:08 AM
Hi Pete16,

In your TV go to the set up menu-TV settings-Sound-Advanced Put Easylink on on and HDMI ARC in ON also.
For the HTS:
Connect the HDMI OUT/HDMI OUT (ARC) connection of the HTS to the HDMI ARC connection of the TV.
Press the "Home" button on the remote control
Select "Setup>EasyLink>EasyLink>On, and then press 'OK'
Select "Setup>EasyLink>System Audio Control > On, and then press 'OK'.
Select "Setup>Easylink>Audio Input Mapping" to map the HTS to the ARC connection
Follow the on screen instruction to complete the setup

Good luck

pete16
11-12-2012, 12:00 PM
Hi Pete16,

In your TV go to the set up menu-TV settings-Sound-Advanced Put Easylink on on and HDMI ARC in ON also.
For the HTS:
Connect the HDMI OUT/HDMI OUT (ARC) connection of the HTS to the HDMI ARC connection of the TV.
Press the "Home" button on the remote control
Select "Setup>EasyLink>EasyLink>On, and then press 'OK'
Select "Setup>EasyLink>System Audio Control > On, and then press 'OK'.
Select "Setup>Easylink>Audio Input Mapping" to map the HTS to the ARC connection
Follow the on screen instruction to complete the setup

Good luck

Thanks Oscar - I will give it a try tonight.
Best regards,
P