How to turn DHCP on my modem on ?

Quote:

---

Originally Posted by carlosfm

Hi,

I have all the network parameters manually configured on my TV and never have problems.
The router has an IP range that it assigns for DHCP, for instance in my case 192.168.2.100 to 192.168.2.199
My router's IP is 192.168.2.1 and network mask: 255.255.255.0
I've configured the TV outside the DHCP range: IP - 192.168.2.2
The gateway is the IP of the router and the two DNS addresses (DNS1 and DNS2) are also the router's IP.
Works fine, always.
Also seems to be faster, no need to obtain an IP.
I always prefer manual configurations.

So, let's translate this to your situation.
Your router is 192.168.1.1
Try this on your TV, I hope your router has a DHCP range and this IP for the TV is outside.

Manual configuration on your TV:
adresse IP : 192.168.1.254
Masque de réseau : 255.255.255.000.
Passerelle = 192.168.1.1
DNS1 = 192.168.1.1
DNS2 = 192.168.1.1

Bonne chance

---

difference is that you would get an IP Address if you choose auto IP on the TV and pascal did not.

@carlos
Manual configuration on your TV:

Well I tried but... no way, my TV ask for series of three number four times : nnn.nnn.nnn.nnn., and your suggestion contains a one digit sery.

@tom
connect the TV directly to the router via Cable, dont use the adapters (yes this means that you may have to move the tv) so you can check if the adapters may be the cause

Well, it is quite heavy, and I must climb some stairs, I'll do this in the week-end when my sons will be there:)

Quote:

---

Originally Posted by a_Tom

difference is that you would get an IP Address if you choose auto IP on the TV and pascal did not.

---

Exactly.
But Pascal has a device in the middle of this, and it may be messing it up.

Sorry Pascal, I didn't remember that Philips TVs require that you insert 3 digits everywhere.
Here's the suggestion again.

Manual configuration on your TV:
adresse IP : 192.168.001.254
Masque de réseau : 255.255.255.000
Passerelle = 192.168.001.001
DNS1 = 192.168.001.001
DNS2 = 192.168.001.001

Quote:

---

Originally Posted by pascal

@carlos
Manual configuration on your TV:

Well I tried but... no way, my TV ask for series of three number four times : nnn.nnn.nnn.nnn., and your suggestion contains a one digit sery.

---

Hi,

if you need to enter xxx.xxx.xxx.xxx then you must enter for 192.168.1.245 the following: 192.168.001.245 - just place a 0 to fill the gaps...

Toengel@Alex

001 ?
Okay, I'll try this, but at now I must leave.
I thank everyone who has been helping me.
I'll be back tomorrow, and I'll tell you if I have fixed the problem.

Pascal

Well, back in town !

Tried manual configuration of the IP and so on = no result.
So, I think we have made the most we could actually.
I returned the Powerline adaptators to the store and I ordered the Philips WIFI adaptator, it will be there in some days. Hope it will be easier...

Thanks anew to everyone who helped me.

Pascal