46PFL9706T/12 Audio disappears.
Not often but sometimes when there´s interference on the antenna signal, like when there´s a Taxi or a moped outside the house which have equipment that give terrestrial interference. The sound on TV disappears which is OK as long as the interference is there but the problem is that the audio never comes back automatically when the signal is OK again (no interference). If I watch TV with the built in DVB-T2 tuner I must go to another TV-channel and back again to get back the audio.
I`ve also experienced that the audio have disappeard for no obvious reason and to get it back I´ll have to do the same procedure, switch to another TV-channel and go back again.
I also have an external satellite receiver connected via HDMI and sometimes when I change to a satellite TV-channel which have a "louder audio level" than the previous one, the audio in TV disapperas, to get it back I´ll have to change to another HDMI-input on the TV and back again.
I´ve tested that audio is working on another TV at the same time when it´s not working on PHILIPS PFL9706T/12 so I´m sure that the problem is in PHILIPS PFL9706T/12 and not in other equipment or in the transmission.
I´ve got a feeling that it is sudden high audiolevel peaks that cause the problem with disappering sound on PHILIPS PFL9706T/12. Is there some kind of limiter in the TV that could cause these problems?
This is getting quite irritating. Anyone else experinced the same problem? Is it possible to correct by software update?
I have installed the lastest software Q5551-0.14.93.0_bld11a