This is solution in side server.
Originally Posted by yut
With all respect to your attempt to help me out on this. Do you think that an average TV owner understands a word of what you are writing?
We are talking about a simple TV set here that is supposed to be DLNA certified and should be plug and play just like all the other devices I have connected to my router and NAS. Every user should be able to use the TV without beeing an IT engineer.
I am an above average user but certainly no IT engineer but I don't understand a word of what you are writing. I use the media servers that come with the DLNA certified NAS which is the default media server or PLEX. I have no idea how to install any other media server which is not packaged by/for Synology.
If someone would develop the PLEX app for Philips TV my problem is solved. Samsung has just released it for their TV.
My 32PFL7605H with Q5551_0.140.47.0 firmware started loosing the connection with my DLNA server after changing from an ADSL modem/router to a Cable modem/router. With the ADSL modem/router I did not have this problem, but with the Cable modem/router (Cisco EPC3925 from UPC) the TV consistently lost connection with the DLNA server running on a Windows 7 PC after something between 30 and 60 minutes.
In my case the disconnect problem was gone after increasing the "DHCP client lease time" setting on the router from 60 minutes (default value on the Cisco router) to 1440 minutes (24 hours). Using a static IP adress instead of DHCP may also work, I did not try this.
To me it seems that the root cause of the disconnect problem is in the TV. Probably the TV does not renew it's IP address lease often enough when streaming audio from a DLNA media server. Philips / TP Vision should be able to repair this by means of a firmware update.
Sofar increasing the DHCP lease time to 24 hours seems to be a reliable work-around. I will come back to this forum if the problem re-occurs.
EDIT: Unfortunately work-around is not reliable.... With lease time set to 24 hours, connection with DLNA media server is lost after about 24 hours. So lease time setting certainly has an effect on the disconnect time. Will now try static IP adresses.
The leasetime of my router is also set to 1440 but the connection still gets lost.
Too bad, with DHCP lease time set to 24 hours, the TV looses connection with the DLNA server after circa ... 24 hours. I will now try static ip adresses.
Originally Posted by Bill Jonair
I think it could be a very good lead...
Originally Posted by yut
I have the same problem with my 46PFL5527T/12. Sometimes the TV looses connection at about 30 min. But I have been able to watch a whole movie sometimes(1,5h - 2h).
My network topology is: Media server ())))) Router ())))) TV.
Router = Some Dlink shit.
TV = 46PFL5527T/12
Media server = Twonky running on w7
())))) = wireless.
I have been monitoring the traffic between the server and TV. My observations so far is that the TV is answering the server bad request and then announces that it want to shutdown the connection. When this happens, the TV looses connection after approx 30 min.
Networking is not my main area, but maybe someone at Philips want to see the Wireshark logs?
Btw: I cant find my TV: 46PFL5527T/12 on www.dlna.org.
I have the same problems with Philips TV. I can't say I solved the problem, but it did get better.
What I've done:
I pluged my TV to the router (ASUS RT-G32) with simple ethernet cable, applied LAN to "n only", switched off routers' brandmauser, applied ip address to TV over DHCP.
And finally my Tab 10.1 on Android 4.0 have found Philips TV as renderer on Bubble upnp DLNA server (i also put max action timeout and render polling interval in settings of "UPnP tweaks").
As a result I played a film for more than an hour without drop out - that's a record! Then it dropped, but I'm not sure may be I stopped it myself by incidence;-)
I'm going to test it! Anyway Philips can't forward or rwind - which is also a shame.
Keep us updated on the results. I am planning to switch from wireless to cable also this week, since the DLNA drop outs drive me crazy.
I have contacted the DLNA organization about the TV (46PFL5527T/12). The "funny" thing is that this TVst and maybe many others is not DLNA certified... So this reasoning about the router not working is just pure BS. GG Philips I wont buy anything of your brand anymore.
PS: I hope Philips will respond to this in some way.
Sorry for the delay in response. Thanks for informing us of this product. Philips has been contacted, the device is not certified and Philips is correcting the issue.
DLNA Certification Administration
From: firstname.lastname@example.org [mailto:email@example.com]
Sent: Tuesday, January 08, 2013 1:56 PM
Subject: Consumer Contact Us Message
CONSUMER Form Information:
Name: Patrik *******
Email Address: *******
Topic: DLNA Certification Process
URL of Page:
I have just bought a Philips smart tv. Philips claims that the tv is DLNA certified but I can't find the device in "DLNA Certified Product Search" The product name of the tv is: 46PFL5527T/12. Can you verify if the tv actually is certified or not?
Thanks in advance
Date: 1/8/2013 9:56:19 PM