Hi,
also restart your router and power off both the TV and the Router for 2-3 minutes
Toengel@Alex
Hi,
also restart your router and power off both the TV and the Router for 2-3 minutes
Toengel@Alex
I cleared net tv cache 3 times
nothing
Hi,
what about unpluging router and TV from power supply?
Toengel@Alex
Ever done, now after first screen (connexion) i have "inscription en cours" (signe on)
It seems to be connected but nothing happens ....since ten minutes
I switched off all from AC....replug all......and the same message appears "inscription en cours"
Sound to me same as all the pre release 140.40...
But indeed: did the TV get an IP addres (can be found under Home ¦ Setup ¦ Network Settings ¦ IP configuration.
Otherwise contact local Philips help desk, as they can help you and see if the TV can reach the server anyway.
At least that is what they did with me...
The Network config in setup seems to be good,
IP adress, DHCP, DNS...all is OK
STEP 2 connexion screen is OK
STEP 3 after a few seconds "Signing Time out" or "Server not found - Try later"
My 32PFL9606h/12 worked including netTV, until I installed the blu-ray BDP5200/12. Now netTV only works on the BDP and my previous recordings on an external HD cannot be fount. The complete device seems to be missing.
So at first I was happy but now I am lost.
The latest software is installed through USB and both have WiFi connection only it isn't really working. I have also completely reinstalled both reset my network and have no idea if it will ever work again.
All,
have now the message could not connetc to the server if i try to connect to the Net-tv via my BDP8000/12
it worked very good till Half December 2011. i have entered agian my web key for the WiFi connection bud there is no resuld.
i can see that there is a connection via my router to the BDP8000/12 i have a 4 bar recieve of the signal and all IP numbers are filled in.
Have installed the latest Firmware 1.6
like to have the Net-Tv back on my Philips Blue Ray:)
DaWanderer
Haarlem
The Netherlands
HI
I have a 37pfl8404 which got a new SSB last week. So i tried NETTV and found out it isnt working. Just the "3 screen" with a stop button and no more. When checking for updates it says that it cant connect to the Philips server. I then started reading this thread and discovered the 123654 menu. It show 00PF0000000 for model. The 2nd line just shows xxxxxxxxxxxxx. What should i do to have this fixed ??
Hi,
call service again - they need to program the SSB correctly.
Toengel@Alex
Allright thanks for the reply. Can they do that remotely or...?Quote:
Originally Posted by Toengel
Ok thanks for the reply. Can that be fixed remotely or ??
Hi,
no.
Toengel@Alex