Originally Posted by Buskopan
Originally Posted by viachaslau
menu / configuration / TV settings / general settings / Reboot TV - must be something like this. To find "Reboot TV" menu item you must scroll down. Its one of the last item.
Troubleshooting Steps that needs to be done for Smart/Net TV Issue:
1.Reset TV and Router. Turn both TV and router off, unplug from power socket and wait for 5 mins.
2.Turn on Router 1st and wait for it to boot. Once it is ready for use turn on TV.
3.Reconnect the TV to your router. Go through the Network Settings.
4.Clear the Internet Memory ( Home > Setup > Network Settings > Clear Internet memory).
5.Check if you have the latest software version.
6. Reinstall/Reboot your TV (Home > Setup > TV Settings > Reinstall TV)
7.Check with Philips Server or Portal Manager if address is being blocked. Provide your Ethernet and Wireless MAC Address.
Anything else I missed for this one?
Thanks in advance for any additional information.
Hope this helps,
yes this is exactly what is did and solved the problem. But this is not best way as you loosing all channels that you set.
Originally Posted by kenan
In my case rebootting the tv dosent work. I change the time settings to manual mode and the problem was fixed. tv model : 47PFL6907T/12.
Originally Posted by heartless.melody
Originally Posted by Jymmy
8. Change the Time Settings to Manual Mode.
I did all solution and solved problem.
but today My TV faced to problem again.
what should i do?
i want to solve permanently....
I had the same "To-complete-NetTV-sign-in-please-switch-your-TV-set-off-and-on-again" issue. It suddenly appeared after months a operation without any problem. Clearing the NetTV memory solved it until a reboot of the tv. Then the problem appeared again. The other 7 options mentioned in a previous posting did not resolve the issue.
So I decided to try the "reset to factory defaults".
To be sure, I switched off the tv and after a minute or so I switched it on again.
After the reset NetTV worked again!
Apparently there is some hidden setting or configuration error that can only be corrected by a factory reset and not by the normal user settings.
I did some further investigation and found out what caused the NetTV problem in my case.
When I installed the tv a long time ago, as country I chose "International". However, NetTV worked fine at that time and I could change "International" to "Netherlands (that's where I live) in the AppGallery to use Dutch applications.
However, since a few weeks NetTV apparently has a problem with this configuration. When I deleted the NetTV memory, the NetTV was set to default value "International" and worked fine. But as soon as I changed the country into "Netherlands" in the AppGallery, NetTV stopped worked after switching off and on the TV.
Unfortunately, changing the countrycode of the TV is only possible by resetting the TV to factory defaults.
Is this a bug that the NetTV application, that it does not allow changing the country to another country as the tv default country setting anymore? Or is this intentional?
I did all solution but after the some days appeared again.
what should i Do?
thanks for cooperation.
Do the troubleshooting again, if after a few days its the same contact your Consumer care for further assistance.
Originally Posted by sasan
i did all solution again and again even i check with an other ISP
wireless mac: D0:AE:EC:21:B8F8
eth mac: 18:8e:d5:d5:26:14
im begging from all of you ,please help me....
Have you done this?
Originally Posted by sasan
8. Change the Time Settings to Manual Mode. (correct the time and date manually)
If its still the same, Send your wireless mac: D0:AE:EC:21:B8F8 and eth mac: 18:8e:d5:d5:26:14 to NetTV.support@TPVision.com.
did as you said, running 3 days.
Originally Posted by RolandPhilipsTV