I have found 2 annoying things.
Today morning my TV turned on automatically and then shut off. I´m using firmware 0.93
I have also problem with nature motion, most time it works perfectly but sometimes it starts to judder after every 3-4 seconds and juddering lasts for 1-2 second. After restart nature motion works well again, until next time. I´m using HDMI and usb memory stick.
BUG:
Yesterday guide suddenly and by itself reverted to "sender" instead of "network" as I have set under preferences.
Tried to change settings by first choosing sender and then back to network: no-go.:mad:
Unplugged the TV from power and plugged in again: success!
This morning, when I wanted to watch a recording, guide had automagically set itself to "sender" again. :mad::confused: Subsequently I could not reach my recorded programs, as they are only available when the guide is set to "network". :(
Reset the TV to factory settings and did a complete setup from scratch. Guide is set to "network" again, hope it'll stick this time...
Has anyone seen this behavior? Any clou what might have caused this, and above all: how can I prevent this from happening in future????
Is there coming support for DTS audio codec in mkv files?
Hi,
I need help with I-EPG.
I've got channel list with DVB-T and DVB-C channels. When I switch channels to DVB-C on network EPG page there is still DVB-T list. I can't get to work list from DVB-C!
How can I fix it? I can't record programs and view full EPG...
Other problem is that only about half polish channels are on I-EPG so please make a full database of these channels or allow recording with EPG form cable provider...
BTW, sound drops on HDMI and SPDiF are still exists :-(
T.
I have again a problem with the 55PFL5507H TV sound when this is conncected to my Mac Mini over a sound jack cable and dvi to hdmi for video. As you sugered, I generated a Blu-ray device and this was ok but now, with the last firmware version, sometimes sound is off after I select the blu-ray device and always when I turn 3D on. So I must turn the TV off and on to retrieve sound. When Philips fix this?
The only way to achieve 720p on full screen is set automatic and margins=0??
I just bought an 40PFL5007H/12 and are not ablle to switch the channels, despite of the manual. No menu-item is displayed when i want to try to rearrange the channels.
Can anyone help?
I have got a list of the channels. Using the joinspace function i got an current list. But I didn't find a command to post the channels...
It's easy: Presuming you've already installed the TV and have automagically installed all channels: Switch on the TV and press "list" on your remote. You'll get a list of channels. Now hi-light the channel you wish to move to another place (select it with the <^> keys, but doe NOT press OK) and press "options" on the RC. Now you're able to move the channel to another place.Quote:
Originally Posted by RVE
Note: You will have to do channel by channel like this, so it's a time consuming job... :( I'd leave the channels as they are if I were you, and get used to the new order..
Thnx Racker, the case is: This function is disabled in the Netherlands, because of an agreement with several providers....Quote:
Originally Posted by Racker
That's why i try too find an alternate option..
Hmm... That's new to me: I'm from the Netherlands too; have been able to work like this on my mother-in law's 3000 series TV (Ziggo) as well as on the huge 9000 series of a friend (UPC) and my own 32PFL4007 (Digitenne). Are you sure it's disabled??Quote:
Originally Posted by RVE
Racker, I talked with Philips support by phone. They told me. I found an artical on the net with the same problem. On my other TV from 2009 i can change the channels the way you discribe. On the new one i can't!! I know how to do it, but the function isn't available! I'm very disappointed in Philips now !! The only change i want to make is switching 3 HD channels with the same 3 not in HD.lQuote:
Originally Posted by Racker
That's ludicrous! Philips should surely re- enable the function in their next firmware- update. It's Your TV, so YOU should be able to handle it as you wish!! :mad:Quote:
Originally Posted by RVE
That's strangeQuote:
Originally Posted by RVE
I have a 32pfl5007 with firmware 93 and i have no problems with rearranging channels with digitenne DVB-T.
Hi guys,
I have a problem with my 32pfl5007 with latest firmware and i am curious if this is a bug or my tv has a problem. I am watching Digitenne (DVB-T) with na conax cam and smartcard. Only every few minutes the tv goes black and a message that there is no antenna signal appears, after a few seconds the channel is on again. I have put the same conax cam, smartcard and antenna in my tv downstairs, that one is an old samsung lcd....there are no problems in the samsung with this configuration.
I am a bit sorry that i havebought this model.........it's not a cheap one, so it would be nice if it works correct.
This sure looks like an antenna- problem. Do your two TV's share one single antenna? If so, it's a TV problem. If, as I suspect, you are using a seperate antenna for the upstairs TV, you should try moving this antenna to another position.Quote:
Originally Posted by satturk