Search:

Type: Posts; User: Erling Johansen

Page 1 of 2 1 2

Search: Search took 0.02 seconds.

  1. Sticky: The children woke me up early this morning...

    The children woke me up early this morning because they could not turn on the TV. The red LED flashing was all that happened when pressing the remote power button. The set did not respond to the...
  2. Sticky: I just got the first unexpected reboot while...

    I just got the first unexpected reboot while doing nothing, watching terrestrial FTA via internal tuner. The main difference since 9.32.125 is the audio, which is mostly fixed. All other issues that...
  3. Sticky: Factory reset did fix the T2 deafness, but there...

    Factory reset did fix the T2 deafness, but there is no video nor audio when selecting a tuned in T2 channel, just a "no signal" message. Moving the antenna connection from the TV to the recorder...
  4. Sticky: DVB-T2 tuning seems to be broken in firmware...

    DVB-T2 tuning seems to be broken in firmware 9.119.49. The TV either hangs forever on manual installation of a T2 mux, or it comes back empty handed. Also, automatic search does not find any T2...
  5. It was possible to use these TV's as a dumb...

    It was possible to use these TV's as a dumb display a few updates ago, but this has changed.

    The image quality used to be very good right out of the box. Now it is necessary to adjust manually....
  6. I'm afraid the time path is very long. Find a...

    I'm afraid the time path is very long. Find a rough estimate below.

    Firstly, there is creation of expectation going on here, still the forum history shows that very little of significance actually...
  7. Sticky: TV Model: 48PFS8109/12 Previous Firmware:...

    TV Model: 48PFS8109/12
    Previous Firmware: 9.32.118

    - Image adjustments reset to factory defaults

    This just happens now and then at standby or wake up from standby, ie I have never seen it...
  8. Sticky: TV Model: 48PUS9109 Previous Firmware: 9.32.118...

    TV Model: 48PUS9109
    Previous Firmware: 9.32.118

    + Saving the channel list to an USB stick works now

    I was hoping this would enable restore from the USB stick after a factory reset. That would...
  9. I run into a problem yesterday where Skype...

    I run into a problem yesterday where Skype reported that it could not find the camera. So I entered the settings and found that the camera was turned off. Turning it on resulted in the usual message...
  10. Lately? I don't think so. You posted the...

    Lately? I don't think so.

    You posted the following last year about your 2013 model:

    "This TV just keeps amazing me. For many years I've been an enthusiast hobbyist among the consumer...
  11. I would guess this is a fix for the missing HEVC,...

    I would guess this is a fix for the missing HEVC, and thus not relevant for the 8109. Also, since users can't have basic HDMI work consistently, what purpose would it serve to bring fixes on a...
  12. Well, I had decided to stop updating due to the...

    Well, I had decided to stop updating due to the regressions, but got .118 installed by mistake, and that destroyed the audio, so I updated to the current .125 version, which fixed the audio 70%, it...
  13. Rulle, If you ping the TV from your Mac, does...

    Rulle,

    If you ping the TV from your Mac, does it respond in a timely manner, especially when it is busy with HD display with out of sync audio?

    Does turning off your Wifi base station (or...
  14. What I don't understand is why they didn't...

    What I don't understand is why they didn't distribute a revert for the audio issue immediately after the fact. They could have re-issued .107 as .119, for example, and users would have had audio...
  15. Did you retry without tuning? Is AppleTV audio...

    Did you retry without tuning? Is AppleTV audio still out of sync? Is it permanent or sporadic? What AppleTV generation do you have and what HDMI resolution are you using? Mine is third gen, connected...
  16. Rulle, That was a long list of issues for a...

    Rulle,

    That was a long list of issues for a relatively simple setup. Have you tried to reduce the setup even more to figure out whether or not the madness is endless or not? I would try this:
    ...
  17. Gerd, Thank you info. I'm surprised that...

    Gerd,

    Thank you info.

    I'm surprised that you can watch TV via the internal tuners. That does not work consistently with my set, ie if I factory reset and then tune in terrestrial FTA (ie no CAM...
  18. Gerd, When you say you can watch TV, is that...

    Gerd,

    When you say you can watch TV, is that via your recorder or are you using the internal TV tuners? With a wall mounted set like yours, does ambilight and built-in speakers work well? How...
  19. Rulle, It seems to me something that isn't...

    Rulle,

    It seems to me something that isn't software-related is wrong if this does not work for you. My 8109 has performed like a charm since I demoted it to a sole display, meaning tuners and...
  20. To unlock image settings: hilite the menu item to...

    To unlock image settings: hilite the menu item to unlock, then type 473473 on the remote. Repeat to lock.


    Erling
  21. It is a Gigablue (Quad Plus with two S2-tuners...

    It is a Gigablue (Quad Plus with two S2-tuners and two T2-tuners). There are cheaper alternatives if you don't need 4 tuners internally. There are also more expensive alternatives like Vu+ and...
  22. FWIW, I updated to 9.32.107, which didn't help in...

    FWIW, I updated to 9.32.107, which didn't help in any way, quite the contrary, and therefore decided to fork out the money for a linux receiver to replace the TV and network features of the 8109. I...
  23. This is misleading people. The issues albi on...

    This is misleading people. The issues albi on 8109 is having are not fixed by the latest update. Based on experience with all updates since july, and the fact that revert is not an option: think...
  24. TV Model: 48PFS8109/12 Previous Firmware:...

    TV Model: 48PFS8109/12
    Previous Firmware: 9.32.28

    Positive:

    + Nothing that I can find.

    Negative:

    - worst software to date.
  25. I also have this issue, starting with software...

    I also have this issue, starting with software version 9.32.28. Did you find a solution (or an explanation for the observed behavior)? Does the Philips logo on your set flash as well when this...
Results 1 to 25 of 43
Page 1 of 2 1 2