See post #111:
Type: Posts; User: L1Zeeman
See post #111:
You can download the User Manual upgrade file from the support page for your TV, e.g.:
Not sure if it works for your model TV too, but for the 2012 models you can suppress this behaviour by switching ClearLCD to 'on'.
Is the information on that site correct?
Click "APPS ON TV"
Select "Device group": Philips TV
Select "Device subgroup": 2012 - Fusion
Result: No matching records found
Have you tried it?
As far as I can recall from when I was still using the USB recording, you can playback a recording while another recording is in progres (using the "broadcast EPG", TV...
I had a similar problem with this model TV.
Solved it with below procedure:
- Download the software, unzip and rename the file "autorun.upg" to "newsoft.upg"
- Take an empty USB-stick, create a...
See post #77:
I have not tried it, so I can not confirm it works.
As Ina wrote, it is not advised,...
Unfortunately the 8xx8 is not compatible with CI+ 1.3.
See also this thread, post #4:
The TV only accepts upgrade files that are valid for that TV, so you can not upgrade with a wrong file.
The upgrade file for 42PFL7108K/12 and 42PFL7108S/60 is the same.
So there is no need to...
Try to install software 0.100, that should fix this problem
See the support page for your TV for the software download and instructions:...
Try the procedure as given in post #3 here:
[QUOTE=Barrowboy63;63039] When you say power supply fault, do you mean internally, or the supply from the mains? [QUOTE]
The internal power supply board, so it is the TV that needs to be repaired.
The three times blinking LED indicates that the TV is in protection mode because the power supply voltage was outside its normal range. Most likely cause is a defective power supply, but it can also...
In some cases the file autorun.upg is not recognised.
Rename the "autorun.upg" to "software.upg".
Make sure there's no file named "autorun.upg" on the USB stick.
Try if the upgrade procedure...
You need to scroll down to the bottom of the page.
The link to download the software is under "attachments".
You can check that on the Ziggo website:
under "Geschikte toestellen" click on Philips,...
The key indicates that a channel is encrypted (then you need a CAM+smartcard to view that channel).
In this case your provider (Ziggo?) sends Nederland1HD without encryption, this allows...
The textbox I get on my 32PFL6007H/12 says: "Remove all inserted USB memory devices. Disconnect the mains power cable. Reconnect after one minut."
Maybe the text is different in other languages (I...
Your 6007 already has a dual core processor (like the 2013 models will have).
This can happen when the picture format is set to "unscaled".
Check the setting (when in the app, as the setting is different from TV settings) and set to "Auto fill".
You can only record using the internal DVB-C/T tuner.
So you can not record a signal from the HDMI input.
If you use an external source, you can try switching to the Game/Computer mode.
This by-passes most of the picture processing in order to reduce latency.
Some users on the German forum...
Last month my 32PFL7606 (2011 model, TV550-platform) was "upgraded" to a 32PFL6007 (2012 model, Fusion-platform). I can confirm that the picture quality w.r.t. movements for the...
I believe this is a different kind of judder, it seems the picture processing gets into some kind of oscillation mode and a "double picture" is displayed.
HDNM can only partly conceal it, you can...
I can confirm this problem on my 32PFL6007.
The picture judders and stutters on and off.
At times tickertapes are unreadable due to "double" picture, as if you're watching 3D without glasses