Technical feedback - FW v2.1x and 2.0x for3xx7 series (2012 models)

[Philips - Benedickte]

Hi all.

The new FW is now live. This thread is for technical feedback only. For other discussions please post in the discussion thread.

Note: All posts need to be approved in this thread, meaning it will not be visable before this is done. No need to repost if not come live.



IMPORTANT: After upgrading your TV, it is necessary to perform a "cold start". This means that, after the TV is running again (after the update), shut down the TV, wait 1 minute (till all components are shut down), and unplug the TV from the mains (pull power cord) for 2 minutes before starting again.

Changelog:

T911E_2.18 (Date published: 2013-02-06) – before 2.15
T912E_2.09 (Date published: 2013-02-06) – before 2.07
T913E_2.13 (Date published: 2013-02-06) – before 2.10
T921E_2.15 (Date published: 2013-02-06) – before 2.12
T922E_2.11 (Date published: 2013-02-06) – before 2.08
T923E_2.16 (Date published: 2013-02-06) – before 2.13
T933E_2.04 (Date published: 2013-02-06) – before 2.02

• Improved channel switching time for DVB-S channels. (Only applicable to country, Turkey)
  
• Fixed Romania DVB-C teletext issue

Please use the following template in this thread.
Off topic posts regarding the firmware will be moved to the discussion thread (linked over).
============================
TV Model:
Previous Firmware:

Positive:
+
+
+

Negative:
-
-
-
============================


Best regards,
Benedickte

[Richardo]

TV Model: 46PFL3805T
Previous Firmware: 2.08

Positive:
+
+
+

Negative:
- Not being able to control the headphone volume with the volume buttons. (too much hassle to enter the menu and change there)
-
-