Hybrid View
-
02-05-2013, 08:45 AM #1Moderator
Achievements:



- Join Date
- May 2012
- Posts
- 987
- Points
- 9,023
- Level
- 28
- Thanks
- 1
- Thanked 17 Times in 15 Posts
- Rep Power
- 10
Technical feedback for FW 150.83 - for 6/7/8/9000 Series - 2012
Hi all.
The new FW is now live. This thread is for technical feedback only. For other discussions please post in the discussion thread.
Note: All posts need to be approved in this thread, meaning it will not be visable before this is done. No need to repost if not come live.
IMPORTANT: After upgrading your TV, it is necessary to perform a "cold start". This means that, after the TV is running again (after the update), shut down the TV, wait 1 minute (till all components are shut down), and unplug the TV from the mains (pull power cord) for 2 minutes before starting again.
Changelog:
QF1EU-0.150.83.0
- Improvement on robustness for files(.jpg) via usb stick.
- Solution for the predefined channel lists of Sky in Germany/Austria and Switzerland
- Improvement to connect via WIFI to Lynksys router WRT54GC.
- Improvement for Electronic Program Guide.
Please use the following template in this thread.
Off topic posts regarding the firmware will be moved to the discussion thread (linked over).
============================
TV Model:
Previous Firmware:
Positive:
+
+
+
Negative:
-
-
-
============================
Best regards,
Benedickte
Last edited by Philips - Benedickte; 02-05-2013 at 09:05 AM.
Forum Mod
-
02-10-2013, 11:58 AM #2Silver Member
Achievements:


- Join Date
- Nov 2010
- Location
- germany
- Posts
- 63
- Points
- 2,118
- Level
- 12
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 3
============================
TV Model: 55pfl8007
Previous Firmware: 150.82
Positive:
+ subjective a better picture
+ ambilight works as aspected
+
Negative:
- broadcast epg: if i use now next, there's no information, the panel is empty, if i switch to guide and look there, there is an information, if i now going back over the remote control button, i have an information again
- if i streaming a 3d content, the 3d option "less" gives me only the left eye image, in 3d over the tuner it works fine
- missing preset game
============================
-
02-21-2013, 06:36 PM #3Bronze Member
Achievements:

- Join Date
- Feb 2013
- Posts
- 15
- Points
- 243
- Level
- 2
- Thanks
- 0
- Thanked 1 Time in 1 Post
- Rep Power
- 0
TV Model: 55pfl6007
Previous Firmware: 150.82
Positive:
+ perfect ambiance
1-TV menu is very slow.
2-Remote controller feedbacks are so slow. The TV sound is slow when up/down
3-Smart TV doesn't support Flash Player powered internet pages. Smart menü is very slow.
4-The TV menu sometimes gets locked and keys don't work. Volume up/down and channel forward/backward
keys sometimes get locked and don't work.
5-Password channels on CI+ module don't operate when TV is turned on after being turned off.
The card on CI+ module needs re-altaching after being detached.
6-Even when the motion mode is at minimum it deforms the logosin actions scenes.
7-Even when dinamic backlight setting is turned standart dense horizontal lines appear when daytime
light in films go in to night time lights and vice versa.
and easylink problems.
-
03-03-2013, 02:48 PM #4New Member
Achievements:
- Join Date
- Mar 2013
- Posts
- 1
- Points
- 25
- Level
- 1
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 0
55pfl6007
firmware QF1EU-0.150.83.0
Pros
+lounge light works better
Cons
-Baclight flickering. Unacceptable horizontal flashes in the middle part of the screen
-Smart tv conectivity problems
And BTW...- why "sleep timer" is hidden so deep in menu?! Its kinda sick...Last edited by kiniutek; 03-05-2013 at 05:53 AM.
-
03-05-2013, 09:15 AM #5New Member
Achievements:
- Join Date
- Mar 2013
- Location
- Germany | 42PFL6877K/12
- Posts
- 4
- Points
- 59
- Level
- 1
- Thanks
- 0
- Thanked 1 Time in 1 Post
- Rep Power
- 0
Feedback Template:
============================
TV Model: 42PFL6877/K12
Previous Firmware: 150.082.000.
Negative:
"TV switches automatically in a Mode like 'Quick Start'" from 'normal Standby'. Like, because first the 'Quick Start' - Mode is definitely Off and second, the TV does not return automatically back into 'normal Standby'; electrical consumption in 'normal Standby' ~ 0.1 Watt, in 'like "Quick Start"' - mode ~ 23 Watt or more with connected devices.
Details about the error, triggering the error and an existing Workaround, look here, please.
Similar Topics
-
Technical feedback - FW v96.0 for 4xx7 and 5xx7 series - 2012 models
By Philips - Benedickte in forum TV: Software 2012 models (feedback template)Replies: 5Last Post: 03-19-2013, 03:40 PM -
Experience Thread - FW 150.82 - for 6/7/8/9000 Series - 2012
By Philips - Benedickte in forum TV: Software 2012 modelsReplies: 180Last Post: 02-05-2013, 07:39 AM -
Technical feedback for FW 150.82 - for 6/7/8/9000 Series - 2012
By Philips - Benedickte in forum TV: Software 2012 models (feedback template)Replies: 25Last Post: 01-21-2013, 07:38 PM -
Italian 9000 Series No DVB-T2, Well Smart MOVE
By mad4hit in forum TV: InstallationReplies: 3Last Post: 11-22-2011, 09:32 AM -
140.037 for 8000 and 9000 series
By tolgaakcan in forum TV: Software 2010 modelsReplies: 6Last Post: 06-11-2011, 06:11 AM


Bookmarks