Experience thread - FW v150.87 - for 6/7/8/9xx7 Series - 2012

[Philips - Benedickte]

Hi,

The new FW is now live.

For technical feedback (pos. and neg. points) please post in the following thread: http://www.supportforum.philips.com/...6277#post56277
This thread should be more for details and discussions.

IMPORTANT: After upgrading your TV, it is necessary to perform a "cold start". This means that, after the TV is running again (after the update), shut down the TV, wait 1 minute (till all components are shut down), and unplug the TV from the mains (pull power cord) for 2 minutes before starting again.

Changelog QF1EU-0.150.87.0

· Solution for Cablenetwork ESR Sion in Switzerland.
· Solution for picture moves 5 pixel right when in PC/Game mode.
· Solution for Video corruption every 10-20 sec on VHS device.
· Solution for installation issue on Czech UPC cable.

[husq570]

Still no hdnm (perfect motion) fix. Hopless

[Peksi]

I don't know laugh or cry, this is so frustrating.

HDNM goes still ON if I shut down tv in back panel.

HDNM doesn't work right if camera moves fast.


MKV files works fine only usb input (but no DTS).
DTS is not a problem if other inputs works right.
HDMI input still slowdowns and jumping.

And again, wait month or two.
Maybe next fw fix.... HAHHAHHAHHAH!!!!!!

[Htep]

Hello,

I think I will give up with philips updates. HDNM seems to be an hardware issue, I will no longer wait for a patch, I switch HDNM OFF on all profils.

Menu are slow slow slow, I bought a 2012 TV not a 1980 TV!!!
I will test DLNA...
I always have the (tiny) crackling sound when I switch on chanel...

I'm fighting with philips for a refurb... the 6907 is not finished (and firmware is poor).

[Geralt1]

Hi, i have 46PFL7007K/12

in the new FW is error! I have CI module SmarDTV EuroCAM for satellite tuner. After installation new FW still on screen message coded program or channel is not installed. I returned to 0.150.85.0 and all is ok.

I don't understand phillips programers why not realy test their software and hw. Phillips support recommend me to buy CI module EuroCam or Neotion, but new FW not correctly working with EuroCAM.
I recommend philips programers upgrade compatibility CI modules, upgrade menu speed and remake list of chanels to line listing from silly abreast.

regards Johny

[miet55]

I wrote the software FW150.85 a problem with the CAM module. The fact that it does not play recorded programs with frequency 12265V, 12284 H and 12188 V Polish support claims that Philips does not certify Polish satellite operators. Question to the moderator why your TV is sold on the Polish market?
@ Geralt1 you're right! For me, the FW150.87 often there is information that the program encrypted. Not always but often.

[Philips - Benedickte]

Hi, i have 46PFL7007K/12

in the new FW is error! I have CI module SmarDTV EuroCAM for satellite tuner. After installation new FW still on screen message coded program or channel is not installed. I returned to 0.150.85.0 and all is ok.

Hi Johny.

Could you please confirm what version of SmartDTV eurocam you have? (Viaccess or Cryptoworks)
What channels does this happen on? (only a few or all)

Best regards,
Benedickte

[elwis85]

Hallo

I have philips 47 pfl 6007 and this is my wrong idea. I pay many money and what I have ? Only half working tv.
I really don t understand why you not fixing very important problem with HDMN this artifacts it s terible. I really want back this tv to shop and comeback my money but service tell me nothing wrong see. I m very disapointed yours product. Sorry for my english.

[Geralt1]

Hi Benedickte

I have CA modul Irdeto EuroCam+ SmarDTV for satellite provider Skylink - Czech republic. Firmware of CA module is newest. This happend on random channels no all. I bought this CA module to recomending of philips support hot-line. Recommend EuroCAM or Neotion.

Thanks for interesting my problem. I thing TV is very good (beautiful picture), but software and firmware degrades this TV to 50% quality. So it was very expensive and I expect 100% quality and functions as other brands.

Johny

Hi Johny.

Could you please confirm what version of SmartDTV eurocam you have? (Viaccess or Cryptoworks)
What channels does this happen on? (only a few or all)

Best regards,
Benedickte

[x7007]

There is a bug with Perfect Natural Motion when enabling it no matter what option - minimum,medium,max, + Clear LCD + 3D mode no matter which one of the 3D, 2D to 3D or any other, after choosing the Natural Motion still works, but after going back to 2D the Natural Motion is disabled even if it still select enabled -minimum-medium-maximum one of them doesn't matter which. To reactivate you need to select Game Mode or Computer mode and then Disable it, then it works.


Why making 3D canceling the Perfect Motion when going back to 2D ?

Why to make Perfect Motion enabled again we need to select Game mode or Computer mode and then disable ?

Can you fix this in the new firmware ? I can replicate it every time .


Another problem with Perfect Natural Motion when it is enabled, Movies have judder,lag,slow motion and some artefact ghosting. the only fix is to enable Game Mode or Computer , but I didn't bought this tv not to use the Perfect Motion as it gives another view and better quality to the movies. 720p and 1080p.

Can you please check this ?

[Philips - Benedickte]

I don't know laugh or cry, this is so frustrating.

HDNM goes still ON if I shut down tv in back panel.

Hi Peksi.

Do you experience this if you turn HDNM to OFF, then set it to standby by remote control?
What source do you experiencing this on?(HDMI1/2/3, VGA etc)

Best regards,
Benedickte

[x7007]

Benedickte

7007 150.87 HDMI to PC - 7970 ATI

Can you please try to replicate ?

Have Natural Motion active minimum,medium,maximum > Computer Game Mode - OFF
Click the 3D button to choose whatever you want, say 2D Convert 3D
Change back to 2D

The TV will be set as GAME Mode even when it's marked as OFF. > Natural Motion doesn't seem to work.

To fix this I need to go all the way to Computer-Game mode when it's OFF I need to select Game or Computer the TV Flash a bit, then I choose OFF again, Natural Motion works again.

Can you fix this ?

[Philips - Benedickte]

Hi all.

I would like to remind you of the official statement that was made in December regarding HDNM. Please see link to this here:
http://www.supportforum.philips.com/...ll=1#post46919

Best regards,
Benedickte

[x7007]

Hi all.

I would like to remind you of the official statement that was made in December regarding HDNM. Please see link to this here:
http://www.supportforum.philips.com/...ll=1#post46919

Best regards,
Benedickte

Could you please post the statement, I went thoroughly through everything that was written there and I couldn't find anything about HDNM or anything about this problem.

Thanks

[Philips - Benedickte]

Could you please post the statement, I went thoroughly through everything that was written there and I couldn't find anything about HDNM or anything about this problem.

Thanks

Hi

I apologise I put the wrong link. Please see the edited link in the last post.

Regards,
Benedickte