-
10-16-2013, 11:47 AM #1
- Join Date
- May 2013
- Posts
- 3,175
- Points
- 22,602
- Level
- 46
- Thanks
- 44
- Thanked 107 Times in 90 Posts
- Rep Power
- 10
Experience thread - FW v000.171.056.000 (171.56) - for 6xx8 Series - 2013
Hi,
The new FW is live. For technical feedback (pos. and neg. points) please post here:
http://philips.to/1ew6qNy
This thread is more for details and discussions.
This FW is applicable to EU models only.
IMPORTANT: After upgrading your TV, it is necessary to perform a "cold start". This means that, after the TV is running again (after the update), shut down the TV, wait 1 minute (till all components are shut down), and unplug the TV from the mains (pull power cord) for 2 minutes before starting again.
Changelog:
QF2EU-0.171.56.0 (Date published: 2013-09-05)
- Improvements in quick startup implementation.
- Solution for screen edges reset.
QF2EU-0.171.51.0 (Date published: 2013-07-11)
- Solution to use Netflix.
- Solution regarding installation issue in Switzerland.
- Solution regarding MHP application.
QF2EU_0.171.49.0 (Date published: 2013-07-05)
- Enabling DTS for 7000/8000/9000
- Wifi smart screen for Android devices (requires Philips MyRemote app)
- New application Multi Room TV watching.
- New version of YouTubeLeanBack.
- Improvement of the MyRemote App at the level of the TV-guide and control on Smart Phones.
- Improvement about installation Czech UPC cable.
- Improvement about BBC i-player movies not working.
- Improvement to have the favourite channels on top via IP-EPG.
- Improvement for the Social TV app.
- Improvement about the crackling/loud plopping noise when switching on HDMI equipment.
- Improvement for the remote control pairing in virgin mode.
- Improvement to avoid to have only vertical lines but to have picture at startup.
- Improvement to avoid reboots when playing 3D via Blu-ray or Astra 3D.
- Improvement to get positive DVB-S Unicable installation with Technisat equipment.
QF2EU_0.68.18.0 (Date published: 2013-04-12)
- Solution about consistent behaviour of the EXIT key.
- Home screen adaptation for Germany. (Kabel/Antennen Fernsehen)
- Hebrew text disabled in Now en Next + 8 days EPG. (Mainly solved for Israel market)
- Improvement stability behaviour when starting up from HDMI source.
- Live TXT subtitles from broadcast no longer shown during playback of a recording without
- BBC iPlayer, video and radio program is functioning again.
- Solution about sometimes no connection to Philips Smart TV portal during virgin installation.
Best regards,
InaLast edited by Philips - Ina; 10-18-2013 at 10:51 AM. Reason: Adding link to Technical Thread
-
10-21-2013, 10:25 AM #2
- Join Date
- Aug 2013
- Location
- Poland
- Posts
- 7
- Points
- 302
- Level
- 3
- Thanks
- 1
- Thanked 0 Times in 0 Posts
- Rep Power
- 0
============================
TV Model: 47PFL6008K/12
Previous Firmware: 171.051
Positive:
no problem with startup
no reboots
Negative:
still slow UI especially when watching hd or fullhd
a couple days ago my tv after turning on showed me strange screen with many bright lines. Using remote to switching tv off and on didn't solve problem. Only unplug tv from power cord did.
Is this a new future implemented to new updateor something different.
-
============================Last edited by PiotrG; 10-21-2013 at 12:24 PM.
-
10-21-2013, 12:23 PM #3
- Join Date
- Jul 2013
- Location
- FRANCE
- Posts
- 24
- Points
- 3,493
- Level
- 17
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 0
Hi,
Since i upgrade with this firmware my TV works great. But last week i try to put Quick Start option from automatic to manuel and now i have a black screen when i put tv on. The only thing to do is to unplug the power cable. I try to reinstall tv again with no result.
Model TV 47pfl6678k/12
FW : v000.171.056.000
-
10-22-2013, 11:07 AM #4
- Join Date
- Oct 2013
- Posts
- 28
- Points
- 1,133
- Level
- 8
- Thanks
- 0
- Thanked 1 Time in 1 Post
- Rep Power
- 0
After upgrade. When i watch divx movie, and i stop at half time of movie after watching and turn off TV.....tomorrow i play the same move and when i press "play", movie starts from begining
Resume option is missing
And issue with small subs not resolved
Model: 42pfl6008
FW: QF2EU-0.171.56.0
-
10-22-2013, 12:31 PM #5
- Join Date
- Aug 2013
- Posts
- 8
- Points
- 1,084
- Level
- 8
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 0
Model: 42PFL6198K/12
Firmware: v000.171.056.000 (171.56)
Experiences in last two weeks since the latest software update-
Positive- I still like the ambilight.
Negative:
1) TV restarting in the middle of watching movie through DLNA. (overheat? room temperature 21Celsius) 8GB MKVs. Not often, but once a week.
2) Once in last two weeks with this firmware the TV totally hang up. Not responding. Only switching off the wall socket helped. Made a photo of the TV.
3) TV remote works only for about 2-2,5m distance.
This is the worst TV i have ever owned, it would be nice, if Philips could give us some document with which we could get easily our money back.
Have a good day.
-
10-22-2013, 05:28 PM #6
- Join Date
- Oct 2013
- Posts
- 28
- Points
- 1,133
- Level
- 8
- Thanks
- 0
- Thanked 1 Time in 1 Post
- Rep Power
- 0
In new Firmware.....USB Keyboard not work on "search" tab in You tube.
-
10-22-2013, 05:34 PM #7
- Join Date
- Oct 2013
- Posts
- 28
- Points
- 1,133
- Level
- 8
- Thanks
- 0
- Thanked 1 Time in 1 Post
- Rep Power
- 0
-
10-22-2013, 05:50 PM #8
Awards:
- Join Date
- Oct 2010
- Location
- Toengels Philips Blog
- Posts
- 7,117
- Points
- 86,352
- Level
- 91
- Thanks
- 208
- Thanked 361 Times in 316 Posts
- Rep Power
- 15
Hi,
please, tell us the solution...
Toengel@Alex
-
10-22-2013, 05:58 PM #9
- Join Date
- Oct 2013
- Posts
- 28
- Points
- 1,133
- Level
- 8
- Thanks
- 0
- Thanked 1 Time in 1 Post
- Rep Power
- 0
Unfortunately I thought I have the solution but it does not work. When i found "hidden" search bar on the top of screen it works, but not paired with you tube
unfortunately . probably they fix that issue with next FW.
-
10-25-2013, 01:17 PM #10
- Join Date
- Oct 2013
- Posts
- 28
- Points
- 1,133
- Level
- 8
- Thanks
- 0
- Thanked 1 Time in 1 Post
- Rep Power
- 0
Therefore....in next Fw. Fix or add "font size in player" , "add resume option in player to work after turn off and turn on tv" , "work Usb keyboard on search bar in You tube"
-
10-26-2013, 09:38 AM #11
- Join Date
- Jul 2013
- Posts
- 8
- Points
- 422
- Level
- 4
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 0
Since this update I have the problem that Perfect Natural Motion (causing the soap opera effect) is constantly turned on despite that this feature is disabled in the menu. The soap opera effect is immediately noticable and the only way to turn this off is to set the PNM on max and then disabling the feature. It is quite annoying. I have this problem when watching with my HTPC, regular television (DVB-T) or netflix. I hope this can be fixed in a future update. Furthermore I noticed that in PC and Game mode the picture quality is inferior to the other modes. I noticed this when I compared the picture quality of my htpc (on pc mode) with the quality on normal/movies/personal. Normally the PQ on PC mode should be superior to the other modes because my PC is doing al the processing.
-
11-02-2013, 12:09 PM #12
- Join Date
- Nov 2013
- Posts
- 5
- Points
- 1,026
- Level
- 8
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 0
Same here. It's been this way for me since I bought my tv 3-4 months ago. Updates haven't fixed it. I found that the quickest way to disable it is by pressing the options button on the remote and then switch to a picture theme that has natural motion on, and then back to the one you have without natural motion, the picture flickers, and then PNM is gone (but this doesn't work on the Netflix app since the options button doesn't work there for some reason).
Another way is to have your tv on a input which has game mode / pc activated when turning the tv off. When you start it, it doesn't have PNM on, even if you switch input.
Please fix this, i've been having this problem for months now. Very irritating to change this every time you turn on your tv.
-
11-08-2013, 02:18 PM #13
- Join Date
- Nov 2013
- Posts
- 1
- Points
- 12
- Level
- 1
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 0
Model: 47PFL6008H/12
Firmware: v000.171.056.000 (171.56)
I bought my TV 2 weeks ago. It was working without any problem but when I update the FW to 171.56, after a while it starts rebooting itself and the only way to get rid of it is removing main power, after reconnecting the power it only works correctly for 5 to 10 minutes then starts rebooting again!
Please suggest me a solution as soon as possible.
-
11-23-2013, 09:03 AM #14
Awards:
- Join Date
- Oct 2010
- Location
- Toengels Philips Blog
- Posts
- 7,117
- Points
- 86,352
- Level
- 91
- Thanks
- 208
- Thanked 361 Times in 316 Posts
- Rep Power
- 15
Hi,
new firmware 173.42 is available: http://www.supportforum.philips.com/...x8-Series-2013
Toengel@Alex
Similar Topics
-
Experience thread - FW v000.171.051.000 (171.51) - for 6xx8 Series - 2013
By Philips - Ina in forum TV: Software 2015 models and olderReplies: 21Last Post: 10-18-2013, 10:59 AM -
Experience thread - FW v000.171.049.000 (171.49) - for 6xx8 Series - 2013
By Philips - Ina in forum TV: Software 2015 models and olderReplies: 3Last Post: 07-12-2013, 04:22 PM -
Experience thread - FW v000.171.049.000 (171.49) - for 8xx8 Series - 2013
By Philips - Ina in forum TV: Software 2015 models and olderReplies: 21Last Post: 07-12-2013, 04:13 PM -
Experience thread - FW v000.064.018.000 (64.18) - for 6xx8 Series - 2013
By Philips - Benedickte in forum TV: Software 2015 models and olderReplies: 16Last Post: 07-05-2013, 08:29 AM -
Experience thread - FW v000.064.015.000 (64.15) - for 6xx8 Series - 2013
By Philips in forum TV: Software 2015 models and olderReplies: 0Last Post: 03-28-2013, 08:14 AM
Bookmarks