Results 1 to 9 of 9
  • Topic Tools
  • Display
  • Bookmark and Share
  1. #1
    Moderator
    Points: 11,141, Level: 31
    Level completed: 85%, Points required for next Level: 109
    Overall activity: 99.9%
    Achievements:
    New Achievement!Overdrive3 months registered10000 Experience Points
    Philips - Ina's Avatar
    Join Date
    May 2013
    Posts
    2,411
    Points
    11,141
    Level
    31
    Thanks
    3
    Thanked 66 Times in 53 Posts
    Rep Power
    10

    Thumbs up Technical feedback - FW 150.91 - for 6/7/8/9000 Series - 2012

    Hi,

    The new FW is now live. For details please see here:
    http://philips.to/16IPBwY

    This thread is for technical feedback only. For other discussions please post in the related discussion thread. "Off topic" posts regarding the firmware will be moved to the discussion thread.

    Important:
    After upgrading your TV, it is necessary to perform a "cold start". This means that, after the TV is running again (after the update), shut down the TV, wait 1 minute (till all components are shut down), and unplug the TV from the mains (pull power cord) for 2 minutes before starting again.

    Please use the following template in this thread:

    ============================
    TV Model: xxPFLxxxx (please fill in)
    Previous Firmware: xx.xx (please fill in)

    Positive:
    +
    +
    +

    Negative:
    -
    -
    -
    ============================

  2. #2
    Bronze Member
    Points: 1,049, Level: 8
    Level completed: 50%, Points required for next Level: 101
    Overall activity: 0%
    Achievements:
    New Achievement!1 year registered1000 Experience Points

    Join Date
    Jan 2013
    Location
    france
    Posts
    14
    Points
    1,049
    Level
    8
    Thanks
    0
    Thanked 3 Times in 2 Posts
    Rep Power
    0
    42PFL6007H
    All my feedback is for the 3D mode only

    positive :

    + 3D picture in computer mode is now fixed (see my topic for more information http://www.supportforum.philips.com/...-test-amp-tips )Picture is clean, nore more strange behavior. Wow ! Really, Thanks a lot !

    + input lag in 3D is better than before but it's still heavy (it could be better i'm sure !!!). Games are now almost playable

    Negative :

    - Sometimes i can notice stuttering that can be annoying, but it doesn't last very long.

    - input lag in 3D can be better (at least, give the same value/performance than the game mode if you can't do the computer mode)

    - When i stop the 3D, even if i was in computer mode, i can notice the lag is in normal mode.

    So i presume the TV is in normal mode no matter what, when i switch on 3D. I have to switch back to game mode, then computer mode again to retrieve the good performance.

    Overall, nice update ! It's a really good surprise, even if it took a while.

    I think Philips could give us a simple explanation about the input lag in 3d. Why they disable the computer and game mode in 3D ? (it is an hardware limitation ?)

  3. #3
    Bronze Member
    Points: 1,049, Level: 8
    Level completed: 50%, Points required for next Level: 101
    Overall activity: 0%
    Achievements:
    New Achievement!1 year registered1000 Experience Points

    Join Date
    Jan 2013
    Location
    france
    Posts
    14
    Points
    1,049
    Level
    8
    Thanks
    0
    Thanked 3 Times in 2 Posts
    Rep Power
    0
    [QUOTE=kagerok;62850]42PFL6007H


    Negative :

    One more find !

    - 5 pixel shift to the right, bug in computer mode is back again.

  4. #4
    Moderator
    Points: 11,141, Level: 31
    Level completed: 85%, Points required for next Level: 109
    Overall activity: 99.9%
    Achievements:
    New Achievement!Overdrive3 months registered10000 Experience Points
    Philips - Ina's Avatar
    Join Date
    May 2013
    Posts
    2,411
    Points
    11,141
    Level
    31
    Thanks
    3
    Thanked 66 Times in 53 Posts
    Rep Power
    10
    [QUOTE=kagerok;62907]
    Quote Originally Posted by kagerok View Post
    42PFL6007H


    Negative :

    One more find !

    - 5 pixel shift to the right, bug in computer mode is back again.

    Hi kagerok,

    Please see my post here regarding 5 pixel shift:
    http://philips.to/HTpWsL

    Thank you!

    Best regards,
    Ina

  5. #5
    Points: 10, Level: 1
    Level completed: 19%, Points required for next Level: 40
    Overall activity: 0%

    Join Date
    Nov 2013
    Posts
    1
    Points
    10
    Level
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    47pfl6007k

    negative:
    I found out from the previous firmware (150.89) that during changing a channels (tv) the system is suspending when you press constatntly the button on remote. You have to wait few seconds to change another few channels.
    The same situation is with the volume.
    of course the cold reset has been done.
    Brgds
    Mkna

  6. #6
    Bronze Member
    Points: 1,108, Level: 8
    Level completed: 79%, Points required for next Level: 42
    Overall activity: 0%
    Achievements:
    New Achievement!1 year registered1000 Experience Points

    Join Date
    Sep 2012
    Location
    Denmark
    Posts
    20
    Points
    1,108
    Level
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Hi Philips

    I am experiencing video stutter, since firmware QF1EU_0.150.89.0. It is pretty annoying, can't seem to figure out why. Seems like it only happens when using HDMI input.

    The stutter I am experiencing is like a frame loss, or that the FPS gets lower for a very short priod (1 second). Like 10 frame skips, but it happens often during movie playback (every 1-3 minute)

    Anyone else experincing this ?

    snowatom

  7. #7
    New Member
    Points: 669, Level: 6
    Level completed: 60%, Points required for next Level: 81
    Overall activity: 44.0%
    Achievements:
    New Achievement!3 months registered500 Experience Points

    Join Date
    Feb 2013
    Location
    Belgium
    Posts
    8
    Points
    669
    Level
    6
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    46pfl8007k/12
    QF1EU - 0.150.88.0

    Negative:
    - When the provider change the code every 10minutes or so(smartcard), the screen goes black and comes back on after 15/20seconds, but the sound is missing. Have to restart the set to get the sound back. Never had this problem before.

    -TV has latest FW (150.91)
    -provider TV-Vlaanderen (Sat. Astra1,2,3)
    -CAM TV-Vlaanderen (latest FW) + Card

  8. #8
    New Member
    Points: 669, Level: 6
    Level completed: 60%, Points required for next Level: 81
    Overall activity: 44.0%
    Achievements:
    New Achievement!3 months registered500 Experience Points

    Join Date
    Feb 2013
    Location
    Belgium
    Posts
    8
    Points
    669
    Level
    6
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    468007k/12 ---- 150.91 Additional information to my post 12/11/2013

    -provider TV-Vlaanderen (Sat. Astra1,2,3)
    -CAM TV-Vlaanderen (latest FW) + Smart card

    - When changing channels :sometimes the screen goes black/ no sound. TV is stuck that way and must be restarted. This happens when switching channels by the numbered buttons, the up/down button and the "OK" button when in EPG-mode.
    - Network connection wizard keeps starting by itself on NED1 every 3 minutes. When pressing the "OK" button a recording icon appears in the right corner below and disappears after a few seconds.
    - TV shuts down by itself after some time, even with no external devices hooked up. Timer settings are "Off".

    Upgrade notes are followed as recommended, factory reset is done, no additional settings made.


    Best regards,

    Johnvc

  9. #9
    Moderator
    Points: 11,141, Level: 31
    Level completed: 85%, Points required for next Level: 109
    Overall activity: 99.9%
    Achievements:
    New Achievement!Overdrive3 months registered10000 Experience Points
    Philips - Ina's Avatar
    Join Date
    May 2013
    Posts
    2,411
    Points
    11,141
    Level
    31
    Thanks
    3
    Thanked 66 Times in 53 Posts
    Rep Power
    10

    Lightbulb The new FW is now live

    This thread is now closed. Thank you all for your feedback!

    For feedback on the new FW please use the following threads:

    Experience thread:
    http://philips.to/1gZx7eZ

    Technical Feedback thread:
    http://philips.to/1f6Y2UW
    Forum Mod

Similar Topics

  1. Technical feedback - FW 150.89 - for 6/7/8/9000 Series - 2012
    By Philips - Ina in forum TV: Software 2012 models (feedback template)
    Replies: 3
    Last Post: 11-07-2013, 10:56 AM
  2. Technical feedback for FW 150.88 - for 6/7/8/9000 Series - 2012
    By Philips - Ina in forum TV: Software 2012 models (feedback template)
    Replies: 5
    Last Post: 10-18-2013, 11:31 AM
  3. Technical feedback for FW 150.87 - for 6/7/8/9000 Series - 2012
    By Philips - Benedickte in forum TV: Software 2012 models (feedback template)
    Replies: 11
    Last Post: 07-23-2013, 12:22 PM
  4. Technical feedback for FW 150.83 - for 6/7/8/9000 Series - 2012
    By Philips - Benedickte in forum TV: Software 2012 models (feedback template)
    Replies: 4
    Last Post: 03-05-2013, 09:15 AM
  5. Technical feedback for FW 150.82 - for 6/7/8/9000 Series - 2012
    By Philips - Benedickte in forum TV: Software 2012 models (feedback template)
    Replies: 25
    Last Post: 01-21-2013, 07:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •