HELP! With Headphones >>SHD9200/10<< Connection Cable And Attenuation???

[Alexandros_Kall]

I want to set up the SHD9200/10 Headphones( Attenuation) With Pfl6007h/12 Tv but i confused a little....

So the manual says>>>>
In ANALOGUE mode, connect the audio
device to LINE IN sockets, then adjust
ATT (Attenuation of audio input signal)
(Fig.F).
• For portable CD player, MP3 player
or other devices with 3.5mm triport
socket output, connect with RCA to
RCA cable (provided) and RCA to
3.5mm plug adaptor (not provided),
then switch ATT to 0dB.
• For Hi-Fi, TV, DVD player or other
devices with RCA socket output,
connect with RCA to RCA cable
(provided), then switch ATT to -8dB.

Ok So where i put the switch? I use a 3.5 mini jack stereo to 2RCa Male. The Tv Has a headphones out port and has not rca out ports..... I mean i am not in one of the 2 categories.... Anyone who knows how this switch works to figure out what i have to do???

[Alexandros_Kall]

No One Knows Something??

[Philips - Rafal]

Hello,

To make this connection possible you need to purchase RCA to 3.5mm plug adaptor which is not provided and follow the steps in the manual.

Kind regards,
Philips Moderation Team

[Alexandros_Kall]

Yes i have already. The problem is where to switch the Attenuation rolleyes:
So the manual says>>>>
In ANALOGUE mode, connect the audio
device to LINE IN sockets, then adjust
ATT (Attenuation of audio input signal)
(Fig.F).
• For portable CD player, MP3 player
or other devices with 3.5mm triport
socket output, connect with RCA to
RCA cable (provided) and RCA to
3.5mm plug adaptor (not provided),
then switch ATT to 0dB.
• For Hi-Fi, TV, DVD player or other
devices with RCA socket output,
connect with RCA to RCA cable
(provided), then switch ATT to -8dB.
My Tv is with headphones out plug 3.5mm . So switch headphones to -8db or to 0db?

[Philips - Rafal]

Dear Alexandros_Kall,

Please flip the switch to 0db as shown in the picture below.



Kind regards,
Philips Moderation Team

[Philips - Rafal]

Dear Users,

There is no active discussion on this topic for quite some time. Therefore, we may close the topic for the moment. In case you want to discuss further, you may start a new topic or send me a PM to re-open the topic.

Thanks for your understanding in advance!

Kind regards,
Philips Moderation Team