Your experiences with FW v0.10.105.0 for 6xx6T and 7xx6H/K/M/T series (2011 models)
Please share your experiences with this new SW version here in this topic. Channeling your input will make it easier for users to search and find relevant info.
Discuss all your experiences when upgraded to the new version: new, old, positive, negative...
1. HDMI sound problems: not fixed. sound drops occur (at least) in the following setup:
Blu-ray(Panasonic) OR Satellite Receiver(Technisat) - HDMI - 42PFL7696K02 - Toslink - PioneerAVR
Obviously the Philips TV does not pass through HDMI sound signals properly.
2. HDMI-CEC: Technisat can control the Philips but not vice versa. It would be nice, if the Philips could switch the channels at least.
favourite presets (star) lost
When I mark my analogue presets from 1 to 30 as favourites, then after a while (1 or 2 days), the favourites mark (star) is gone. Other favourites (digital presets 101 to 110) are preserved. When using the TV, I always display the list of the favourites.
This is also a problem in the previous firmware.
I'm wondering what the difference between the 6606K and T is. I don't experience any sound drop issues anymore since my 52PFL5605H was replaced with a 55PFL6606K/02.
T models have a DVB-T2 tuner, K models have DVB-S(2) tuner integrated...
I know but what's the difference that makes the K model work and the T model have dropouts? Is it an additional piece of hardware that "fixes" the audio stream or a different piece of hardware that doesn't have the audio dropout bug?
Originally Posted by Toengel
There's obviously a difference between 6xx6K and 6xx6T/7xx6H/K/M/T series or why are there two different firmware threads?
there shouldn't be two threads...
At the beginning of the 2011 TV series the TVs had different firmware software versions. But in the meantime they all have the same...
At the moment
- firmware 10.105 for 6xx6 and 7xx6 models (H,K,M,T)
- firmware 14.38.6 for 8xx6 and 9xx6 and 21:9 models (H,K,M,T)
Guess I just got lucky then.
Same here with my 55PFL7606K. I have 3 Analogue stations markes as Favorite. Every 2-3 days, these 3 loose their favorite flag!
Originally Posted by rofl
Last edited by Dentlmann; 09-19-2011 at 02:27 PM.
AC3 sound drops TV over HDMI to receiver
Posted this also in thread of an older firmware. The problems as reported here are with the 0.10.105.0 FW.
I am experiencing many sound drops when using TV audio over HDMI ARC to a Marantz SR7005. Similar issues are reported many times before. It looks like it is solved for the xxx5 2010 line by a FW upgrade in april. So why do I have to sound drops on my new 42PDL7906?
Some additional information:
Sound drop occurs on DVB-C channels having audio in AC-3. (The ZIGGO HD channels mostly)
Sound drops do not occur (at least not observed) on DVB-C channels having audio in MPEG-1 layer2 (mp2) (The ZIGGO SD channels)
frequency of drops on HD channels is around 1 drop per 1-3 seconds.
No drops when audio is routed to the TV speakers.
Philips: Please get this solved in FW asap or give me any other advice to get this sorted out.
PS: Also the HDMI switching - no sound (or often distorted sound) problem bugs me!
Last edited by SevenW; 09-20-2011 at 06:18 PM.
Originally Posted by Toengel
Can I use firmware 10.105 previouly released for 7656H and apply it on a 7676H ?
I ask this question because 7676H is not yet registered in Philips database.
- No 3D support over Ethernet / USB (Why is there a limitation?!)
- No DTS support
- Why isn't it possible to teach the TV SMB? I don't like Media Servers
- Port 49153? There's a Webserver returning 404 errors?
- What is the function of the blue key on the remote?
Originally Posted by vincer
Just bought the 47PFL7666T/12 yesterday, man was I dissapointed, mainly because:
No 3d over net/usb
Most mkv's not supported.
Does Philips have any plans to fix this ???