05-08-2012, 07:34 PM
Something should be listening on the TV ... I am using the iPhone app with a 2009 (?) model, i.e. 8404. The app works over wifi and can control many things on the TV. Reading the press-release of the iPhone app it also mentions that is using JoinSpace on the TV however I cannot open a webpage on port 1925....
Originally Posted by sosoro
05-09-2012, 06:38 AM
this JSON on port 1925 is only available on 2011 TVs and newer...
05-09-2012, 09:01 AM
Correct it is; I am not saying it is on older models ;-) However here is the deal, if you do have Jointspace enabled you can still do all the fancy stuff with the API, only you cannot read the docs from your TV... but the API can be found on the internet anyway, so no deal breaker here. I managed to overlay an image, square, text and use input feedback from the TV all with the application JSTx (created by Sander Raaijmakers, great app!).
Originally Posted by Toengel
My TV is a 2010 model and has no port 1925 but I managed to upgrade so Jointspace is available, enabled and accessible!
07-17-2012, 09:35 AM
07-17-2012, 11:13 AM
Sound through Jointspace
Have a look here, post 14:
It seems sound (and also video) is not (yet?) supported through Jointspace.
As a workaround, you could try to remotely start DLNA A/V playback through UPnP, which will give you sound and video.
I haven't tried however, if it's possible to overlay a remoteJointspace app over the DLNA player, to e.g. control the source, but you might get a limited set of source controls through UPnP
07-18-2012, 12:13 AM
Thanks a lot for the quick reply! That explains a lot. The suggested post is dated back in 2010: I hope that sound support won't take much longer before it comes finally available (hopefully ). I'll monitor that forum as well from now on.
Originally Posted by matthias
07-19-2012, 03:36 AM
Got a lot of information from this page that I didn't know yet. Will keep this one checked for this matter. Cheers.
07-19-2012, 06:36 AM
Glad it helped :-)
Originally Posted by klauzser
There is another page you might be interested, which basically provides remoteJointspace Access through a commandline tool:
For 2011 TVs, a patch is(was?) necessary:
This seems to work quite well, beside occasionally loosing focus (e.g. due to TV reboots or when HbbTV is enabled).
Unfortunately, I don't know a way to permanently keep receiving remote inputs, to reenable a lost focus.
12-12-2012, 04:16 PM
- Rep Power
Sorry for reopening this thread, but I have the 42PFL6805H-12 TV with firmware Q55XX_0.140.46.0 which should make this model compatible with Jointspace.
But I don't seem to get it enabled with the keycode, no matter what I try (slow, fast), it just switches channels. Via HDMI nothing happens either.
Does anybody have another way (via USB?) to enable jointspace, it's driving me mad...
12-12-2012, 04:34 PM
you can only enter the code in TV mode - be sure you have the exact number...
12-12-2012, 06:32 PM
- Rep Power
thanks for the swift reply!
I'm pretty sure I have the correct code, I've entered it a hundred times :-)
12-12-2012, 06:56 PM
TV mode (don't know, if this also works in DVB-S mode) and then fast 5646877223
12-14-2012, 07:30 AM
- Rep Power
nope... guess I'm the king of fast channel-switching by now, but still doesn't change anything.