12-12-2011, 04:04 PM #1
- Join Date
- Mar 2011
- Antwerpen, Belgium
- Thanked 0 Times in 0 Posts
- Rep Power
PFL9604H/12 driven by BDP7600/12: HDMI connection fails
Philips PFL9604H/12 (firmware version Q5492_0.26.78.0)
Philips BDP7600/12 (firmware version 1.35)
What is the problem: when the Blu-ray player is switched on while the TV is playing (from the Cable decorder connected to HDMI channel 1), the TV switches to the appropriate HDMI channel 2 connected to the Blu-ray player. However color is heavily distorted (blue becomes violet, white becomes green) and sound is not transmitted.
A work-around appears to be:
1) switch all the power off and disconnect mains;
2) disconnect the both HDMI cables;
3) switch the TV and the Blu-ray player on;
4) reconnect both HDMI cables.
This problem also occurs with the Philips BDP5100/12 (firmware version 1.57).
The problem is definitely not related to the HDMI cables (this was excluded). It is almost certainly not related to either of the two Blu-ray players as the described problem does not occur in combination with an older Philips television with HDMI inputs.
I suspect that the "initialization" of the HDMI connections appear to get lost and that reconnecting the equipment from a neutral state reinitializes the correct settings.
Obviously I am looking forward to a fix.
Kind regards - Paul
By OliBoe in forum Blu-ray: BDP7000 SeriesReplies: 20Last Post: 12-01-2011, 04:10 PM
By bugmenot in forum TV Remote Control and Ambilight AppsReplies: 0Last Post: 11-04-2011, 04:21 PM
By Wombat in forum Blu-ray: BDP7000 SeriesReplies: 10Last Post: 10-27-2011, 06:57 PM
By oyvindm in forum Blu-ray: BDP7000 SeriesReplies: 1Last Post: 09-15-2011, 08:46 AM
By LCD in forum TV ForumReplies: 8Last Post: 08-03-2011, 12:12 PM