Your experiences with FW v0.14.91.0 for 8000, 9000 and 21:9 series (2011 models)

[mk81]

Home
Theater
System

[nnay07]

[QUOTE=Cinema 21:9;20321]

The movement representation of the new Clear LCD 1200 Hz is very unnatural. Give us an additional low setting like the 400Hz model 2010, because the picture is much more genuine and natural!
It also gives the users want simply a natural image without exaggeration!

In my case, the true natural motion is creating artifacts on fast unexpected movements. I'd rather have a much longer delay in cinema mode (players might need some different settings), in order to have a smooth artifacts free image rather than the actual one.

[nnay07]

Home
Theater
System

Fielen Dank!

[Toengel]

Hi,

HTS = Home Theater System (devices made by Philips).

Toengel@Alex

[EdgarPrao]

I also notice very long pauses when switching channels that are decoded by the CI+ module. Often the channel will not show and the message 'channel encrypted' is displayed. Switching back and forwards often solved the issue. It seems that the 14.91 firmware changed something related to the CI+ slot that causes those module errors since firmware 14.84 did not show that issue.

[Graystonedonkey]

I'll report here a bug I also noticed in the last FW14.84:

After using a external device like a Wii at EXT1 or BRP at HDMI1 and switching back to a tv-channel, the value of signal level (Signalpegel) in the menu "Option#Status" is 0.
In the factory menu (123654) CSM3 is the signal-level-status shown as "bad".
Switching hard off/on of the tv-set brings back the signal level to normal values (e.g. 74-82) and in the CSM3-menu status "good".

I could not determine any effects on the picture quality, perhaps it's only a bug of signal level indication and not of measuring.

Andy

P.S. I wouldn't be a Philips firmware-tester. Pls correct the known bugs.

[stefanox]

same happend on my tv too.
take's verry long

I also notice very long pauses when switching channels that are decoded by the CI+ module. Often the channel will not show and the message 'channel encrypted' is displayed. Switching back and forwards often solved the issue. It seems that the 14.91 firmware changed something related to the CI+ slot that causes those module errors since firmware 14.84 did not show that issue.

[mduran]

I'll report here a bug I also noticed in the last FW14.84:

After using a external device like a Wii at EXT1 or BRP at HDMI1 and switching back to a tv-channel, the value of signal level (Signalpegel) in the menu "Option#Status" is 0.
In the factory menu (123654) CSM3 is the signal-level-status shown as "bad".
Switching hard off/on of the tv-set brings back the signal level to normal values (e.g. 74-82) and in the CSM3-menu status "good".

I could not determine any effects on the picture quality, perhaps it's only a bug of signal level indication and not of measuring.

Andy

P.S. I wouldn't be a Philips firmware-tester. Pls correct the known bugs.

Why are you making a deal out of this, If the picture is OK, don't bother. Are you looking at the service menu all the time? ;-)

[Toengel]

Hi,

nevertheless, it's a bug and he reported it... and if the developers are reading here, it can be fixed...

Toengel@Alex

[vadmaks]

Hi, I have firmware 84 for 46PFL9706K/02 http://www.megaupload.com/?d=R5F3R458

who have the FW v0.14.84.0 for me?
if you have can you pls upload it for me,
now i use the 14.91, with a lot off problems, the 84, work fine for me

stef

[stefanox]

i have the 46PFL9706/H12
can i use the 02 version then?

Hi, I have firmware 84 for 46PFL9706K/02 http://www.megaupload.com/?d=R5F3R458

[petasis]

It is safer to use firmwares designed for your TV only.

[Philips]

same happend on my tv too. take's very long

@stefanox and EdgarPrao,

Please after each SW upgrade, perform a cold start: unplug the mains cord for a few minutes.
This helped others too reporting the same zapping speed issues.

Regards,
JuAn

[Philips]

Dear all,

Please refer to item #1 of this thread for the release notes.

Regards,
JuAn

[Vic Vega]

Juan, can you comment situation about flash support?