Your experiences with FW v0.140.45.0 for 8xx5 and 9xx5 series (2010 models)

[Stoebi]

Hello Thomas, good evening.

Please help me. I need to download the firmware from 24.08.2011 (.40.x), because
I can't use NetTV and the Program Guide anymore.

In German:
Nach "Fernsehgerät neu einrichten" komme ich nicht mehr über die Allgemeinen Geschäfts-
bedingungen hinaus. Ein OK oder Up/Down auf der Fernbedienung zeigen keine
Reaktion. Die Fernbedienung ist 100% okay. Videotext lässt sich einwandfrei steuern.

[miro9000]

Hi



you say that you, the Users of this Forum are the only People writing us?
Sorry to disappoint you but our Service Center Guys will not agree with you.

Regards
Thomas

First of all, Thanks for this incredibly fast answer.
I am not saying that this forum is the only way to contact Philips. But this is the only place where the costumers can talk one each other, and see that they are not alone facing their problems.
Of course, i am sure that your guys of the Service Center are receiving thousands of claims

And finally, let me give you some advice:
When writing, sense of humor can be very dangerous, because it is not as well understood as when speaking.
So you have to be very careful if you are a spokesman of an important company as Philips in public forums of Internet.
Customers are customers here, on the phone or in a store

[punschula]

First of all, Thanks for this incredibly fast answer.
I am not saying that this forum is the only way to contact Philips. But this is the only place where the costumers can talk one each other, and see that they are not alone facing their problems.
Of course, i am sure that your guys of the Service Center are receiving thousands of claims

I am shure of this..looking on the Firmware-Updates..brrrrrrrrrrrrrr

[christophexxx]

1- picture quality with 140.44 was better than with 140.45.
2- colors problems (caracters faces) in dark scenes is not resolved.
3- 3d crosstalk : no solution (for example 3d depth adjusment, like with 2011 models ==> 2010/1011 models : same motherboard ).
4- sound problems (for mosts consumers).
5- mpeg artefact reduction : other artefacts appear (verticals lines) ==> control it with a degraded pattern !
6- picture sharpness is not the same with internal tuner (DVB-T/C) and HDMI for the same sharpeness setting ==> must be calibrated (use a sharpness pattern).
7- picture is overexposed with perfect contrast (gamma problem).
8- brightness problem (picture is less brilliant than with 140.37) ==> led calibration.

The last but not the least: sometimes the TV restarts in the night or when I'm at work (funny isn't it !)

[peelaaa]

Hi



you say that you, the Users of this Forum are the only People writing us?
Sorry to disappoint you but our Service Center Guys will not agree with you.

Regards
Thomas

Your sarcastic tone is not appreciated on this forum. Please refrain from this and treat the users of this forum professionally as we are customers of Philips. The forum users on here are trying to help each other, and you are just antagonising us with comments like that.

thank you.

[ali54]

1- picture quality with 140.44 was better than with 140.45.
2- colors problems (caracters faces) in dark scenes is not resolved.
3- 3d crosstalk : no solution (for example 3d depth adjusment, like with 2011 models ==> 2010/1011 models : same motherboard ).
4- sound problems (for mosts consumers).
5- mpeg artefact reduction : other artefacts appear (verticals lines) ==> control it with a degraded pattern !
6- picture sharpness is not the same with internal tuner (DVB-T/C) and HDMI for the same sharpeness setting ==> must be calibrated (use a sharpness pattern).
7- picture is overexposed with perfect contrast (gamma problem).
8- brightness problem (picture is less brilliant than with 140.37) ==> led calibration.

The last but not the least: sometimes the TV restarts in the night or when I'm at work (funny isn't it !)

the big problem for me is number 7 where at times pictuer shifts

[Lech1]

46PFL8605H/12 and PS3 via HDMI: sound clicks still exist, introduced with 0.140.44.0.

[IronJack]

well hope someone will take few time to, at least, fix these important HDMI bug.
Meanwhile id like to know a thing: i've got these mkv file with one ac3 audio track wich is the default track and another one in DTS. Was wondering why it does play it but with no sound. I know that dts isnt supported (.....) but hey at least if there is inside a valid ac3 you should be still enable to play it!

Thanks in advance

[Michiel1986]

the sound click still there back to the old 0.34 this is a joke

Thx for the information, then i keep my 140.39 firmware

Btw merry xmas to all of u guys here ^^

[Lockon]

well hope someone will take few time to, at least, fix these important HDMI bug.
Meanwhile id like to know a thing: i've got these mkv file with one ac3 audio track wich is the default track and another one in DTS. Was wondering why it does play it but with no sound. I know that dts isnt supported (.....) but hey at least if there is inside a valid ac3 you should be still enable to play it!

Thanks in advance

Inspite the fact AC3 track is set as default, it seems that it's not set as primary audio track. Please check MKV structure with 'mkvmerge' freeware utility, you can change audio ID order and remux the file in a minute.

[Gerhard]

...
I'm waiting for the service to call me back...

Well that was fast. Three hours ago they called back and on friday I will
get a new signal board - hope that will do the trick.

I'll keep you posted
Gerhard

[Chrissie18]

As somebody who has experiences with outsourcing of software with three different companies during my SW development carreer that all decided to stop outsourcing and do all development inhouse, I would like to suggest Philips to do the same:
Hire a couple of qualified developers and develop all firmware inhouse, stop outsourcing and get the quality back on track...

I think that if you add all costs (travel, communication, delays, support costs, etc), than it'll probably also be cheaper...

If only I could give you some examples of the code I'm watching at every day....
Chris

[IronJack]

Inspite the fact AC3 track is set as default, it seems that it's not set as primary audio track. Please check MKV structure with 'mkvmerge' freeware utility, you can change audio ID order and remux the file in a minute.

thanks Lockon.
Im checking with mkvmerge and i see that AC3 track is the first, right before the dts one. As i wrote, its tagged as default track but not as the forced one. Maybe is that the option that does the trick?

Thanks a lot

[petasis]

As somebody who has experiences with outsourcing of software with three different companies during my SW development carreer that all decided to stop outsourcing and do all development inhouse, I would like to suggest Philips to do the same:
Hire a couple of qualified developers and develop all firmware inhouse, stop outsourcing and get the quality back on track...

I think that if you add all costs (travel, communication, delays, support costs, etc), than it'll probably also be cheaper...

If only I could give you some examples of the code I'm watching at every day....
Chris

How can you be so sure that they firmware development is outsourced?

[Toengel]

Hi,

the new introduced sound bug (introduced with 140.44) caught on video (thanks to the reader Cent of my blog):



Toengel@Alex