New "Smart TV" user interface

[WileECoyote]

thats right, thats why i asked you about your sets and your FW Version! Good luck!

Hi,
I have a 46PFL7655M same 000.140.046.000 Firmware.
Where I can get previous firmwares?

Regards
Wile E.

[DerShortyy]

Hi,
I have a 46PFL7655M same 000.140.046.000 Firmware.
Where I can get previous firmwares?

Regards
Wile E.

http://www.philips.samipupu.com/9xx5.html

[WileECoyote]

http://www.philips.samipupu.com/9xx5.html

Thanks DerShortyy!
Do I have to downgrade to 140.40 (Solution to activate Net TV in a better way) or 140.39?

Regards
Wile E.

[DerShortyy]

from Philips with a TIP.
I should downgrade to firmware 140.34
Complete the NET-TV setup and then upgrade to the latest firmware.

so it´s best to take 140.34 i guess :-)

[WileECoyote]

so it´s best to take 140.34 i guess :-)

OPS! (^_^)

[Iceman]

I have a 32PFL7605/12 with 140.46 firmware.

After my post I got a PM from Philips with a TIP.
I should downgrade to firmware 140.34
Complete the NET-TV setup and then upgrade to the latest firmware.

It's something I will try to night.

The steps Philips suggested were successful. My "Smart-TV" and "IP-EPG" are working again.
Thanks for the fast reaction.

[Sjekke]

My "digicorder" is connected via HDMI. When I use SmartTV, I have never seen the PIP in "On TV now". It worked once but then never again.

Bug? Suggestions?

Cheers
Sjekke

[zlatko]

@Sjekke
I have STB connected via HDMI as well as media player, but I always have "On TV now" present.
Several times I experienced picture in "On TV now" window disappears, and I can not switch TV to HDMI input. I have to power it OFF/ON to get normal operation again.

[Lucky Kameleon]

Hi all,

In the new Smart TV interface recommendations are shows in the top right container. I've got recommendations for TV programms, but no recommendations for video-on-demand. Am I missing something?

I am a ZIGGO customer in the Netherlands (don't know if that's got something to do with it) and the newest firmware is installed on my PFL7606. The Videoland and Viewster app are installed also and I've rented a movie form Videoland as well.

[Freddy]

Hello all!

First @Sjekke and @zlatko:

HDMI PIP is only available on PFLxxx6 (2011) and later models. The fact that you, Sjekke, said "It worked once", is probably because you had used the internal tuner just before you started SmartTV that time.

And @Lucky Kameleon:

yes, I have the same problem as you: only recommendations for tv programs yet to come. Not for "Uitzending Gemist / RTLXL", nor for "Videoland / Viewster".

[Arnaud]

I have 40pfl8605h/12 and latest firmware 140.046.
I am not able to navigate in smart tv and now i am even not able
To acces net tv anymore (cannot get past registration)

Who can help?
Ps: i read on forum to downgrade to 140.034 but tv did not recognize downgrade install file

[Arnaud]

My problem is solved.
I managed to downgrade to
140.34 . Set up net tv proces.
And upgraded to 140.46 again

[Harald]

Why there are with Smart TV two different start windows? With
mean 32PFL9705 she is like on top and with mine 58PFL9955H / 12 is
they differently! (App's like before listed, no PIP, data weather on the top right and preview below) Giving it a reason for it? Please, around info!

[konik960]

46PFL6606H
Unsubscribe from this forum.
anyone from Philips is not interested in the problems of users.
no response, no response from Philips
system is not polished and it is a scandal
I dissuaded a friend buy this Used Equipment

[starterz]

Really, I think it is time that we heard something from Philips on all reported matters with the new Smart TV interface. Works just fine most of the time at my side (40PFL6606H/12), but nevertheless, if the forum is supposed to be a link with the customers - we are missing it.