Results 1 to 7 of 7
  • Topic Tools
  • Display
  • Bookmark and Share
  1. #1
    Moderator
    Points: 10,193, Level: 30
    Level completed: 41%, Points required for next Level: 357
    Overall activity: 0%
    Achievements:
    New Achievement!OverdriveVeteran10000 Experience Points
    Philips - QK's Avatar
    Join Date
    Oct 2011
    Posts
    884
    Points
    10,193
    Level
    30
    Thanks
    11
    Thanked 34 Times in 30 Posts
    Rep Power
    10

    New firmware v1.27 available for HTS7201 / HTS7202 / HTS72121 /HTS9221 / HTS9241

    Details:
    For this release, there is no change in the main software, ie. the software version is still V1.27. Only change is the MCU software.

    HTS7201 / HTS7202 / HTS7212 - V1.27 MCU 27
    • Improved playback performance
    • Solved wireless speaker volume adjustment issue
    Note: All the above models uses the same bin filename - HTS_7201.bin

    HTS9221 / HTS9241 - V1.27 MCU 27.12
    • Solved no sound from speaker issue
    • Improved playback performance

    Kindly download the latest software from P4C at www.philips.com/support
    Forum Mod

  2. #2
    DerShortyy
    Guest
    Hi QK,

    which Opera USER-AGENT is implemented in the HTS9221?
    Best regards

  3. #3
    Diamond Member
    Points: 4,685, Level: 20
    Level completed: 9%, Points required for next Level: 365
    Overall activity: 25.0%
    Achievements:
    1 year registered1000 Experience PointsNew Achievement!
    Awards:
    Discussion Ender

    Join Date
    Jul 2010
    Posts
    1,083
    Points
    4,685
    Level
    20
    Thanks
    0
    Thanked 1 Time in 1 Post
    Rep Power
    6
    You can check the Opera User-Agent from the Open Internet from NetTV and go to http://whatsmyuseragent.com/.
    Let us know if you experience any problems.
    Last edited by kwinnie; 01-27-2012 at 07:58 AM.

  4. #4
    New Member
    Points: 655, Level: 6
    Level completed: 53%, Points required for next Level: 95
    Overall activity: 0%
    Achievements:
    3 months registered500 Experience PointsNew Achievement!

    Join Date
    Feb 2012
    Posts
    1
    Points
    655
    Level
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Thxs Philips QK
    I've just implemented this firmware on the HTS 7200. I also send you an private message inwhich I stated that I could not upgrade the system. After a new donwload from the appointed site and the user's manual (which couldn't been seen with FIREFOX, I could see it only with COMODO DRAGON browser) I managed to upgrade the system. It works I think at least I've the most "normal"indications that I used to have 20 hrs ago..
    So thanks to U all.

  5. #5
    New Member
    Points: 648, Level: 6
    Level completed: 49%, Points required for next Level: 102
    Overall activity: 0%
    Achievements:
    3 months registered500 Experience PointsNew Achievement!

    Join Date
    Feb 2012
    Posts
    1
    Points
    648
    Level
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Bug on turning on the device

    Hey there,

    I have a HTS9241/12 and the v.1.27 firmware installed. I have since this firmware a bug with the touch button on the device head. My HTS9241/12 is connected to the 42PDL7906K/02 via HDMI (ARC). So if I turn on the TV the HTS follows. And sometimes the touch buttons on the device head stay in standby mode, means the HTS is on but the touch buttons are in standby mode and the power on button is red.

    Maybe you can give this information to your software developers to fix that little bug

    Bye
    Tobias

  6. #6
    Bronze Member
    Points: 721, Level: 6
    Level completed: 86%, Points required for next Level: 29
    Overall activity: 99.0%
    Achievements:
    3 months registeredOverdrive500 Experience PointsNew Achievement!

    Join Date
    Feb 2012
    Location
    Netherlands
    Posts
    11
    Points
    721
    Level
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Hi there, thanks for the new firmware, but I encounter the following issue:

    - Using HTS7202/12
    - Using Cisco DVB decoder/recorder

    1st I start my Cisco
    2nd I start the HTS

    Then I have no sound using Optical Fiber
    I have to put the HTS in stand-by mode and start the HTS again, then I immediatly get sound.

  7. #7
    DerShortyy
    Guest
    Quote Originally Posted by tobiasb View Post
    Hey there,

    I have a HTS9241/12 and the v.1.27 firmware installed. I have since this firmware a bug with the touch button on the device head. My HTS9241/12 is connected to the 42PDL7906K/02 via HDMI (ARC). So if I turn on the TV the HTS follows. And sometimes the touch buttons on the device head stay in standby mode, means the HTS is on but the touch buttons are in standby mode and the power on button is red.

    Maybe you can give this information to your software developers to fix that little bug

    Bye
    Tobias
    I can confirm this behaviour on my HTS9221. When you get near to the HTS the touch bottons begin to light again.

    It is also not possible to stream music to the HTS9221, which is very annoying if you don´t want to turn on the TV too.

Similar Topics

  1. HTS 5581 got stuck after Firmware Upgrade v1.27
    By laphroaig in forum Blu-ray: HTS Series
    Replies: 2
    Last Post: 11-29-2011, 07:27 AM
  2. Firmware upgrade V1.27 for HTS55xx series
    By Philips - Remko in forum Blu-ray: HTS Series
    Replies: 0
    Last Post: 09-19-2011, 10:50 AM
  3. Firmware upgrade V1.27 for HTS9221
    By Philips - Remko in forum Blu-ray: HTS Series
    Replies: 0
    Last Post: 08-12-2011, 08:42 AM
  4. Firmware upgrade V1.27 for HTS9241
    By Philips - Remko in forum Blu-ray: HTS Series
    Replies: 1
    Last Post: 08-12-2011, 08:39 AM
  5. Firmware upgrade V1.42 for BDP3100/05, /12 and V1.54 for BDP3100MKII
    By Philips in forum Blu-ray: BDP2000 & 3000 Series
    Replies: 0
    Last Post: 05-19-2011, 10:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •