46pfl8685h/12 60fps doesn't work anymore

[rubberduck]

hi everyone, i wonder if you had this problem with the 46pfl8685h/12 lcd tv. I used to read without any problems .mp4 files running at 60fps. Then i decided to update my tv with the q55xx-0.140.47.0 firmware available on the philips site. And after this update i can't read them anymore, not even the .mp4's i use to read before the update. I submitted the file mediainfo properties and philips told me i should never been able to read these 60fps mp4 files in the first place. Now i'm stuck reading those .mp4 files on my computer which isn't great especially if you want to share with other people. Is there a way out of it? I don't want any convert software cause the files are 2Go and it would take more than a couple of hours to convert, and the quality is not the same as the original. Any ideas or any updates i could use to upgrade so that i can read these files? Philips told me it wasn't a good idea to downgrade so that i would have the original firmware on my tv. Here's my media info properties for these files...


Format : MPEG-4
Format_Profile : Base Media
CodecID : isom
FileSize/String : 1,57 Gio
Duration/String : 1h 45mn
OverallBitRate_Mode/String : Variable
OverallBitRate/String : 2 134 Kbps
Encoded_Date : UTC 2012-02-28 03:44:18
Tagged_Date : UTC 2012-02-28 03:44:18

Vidéo
ID/String : 1
Format : AVC
Format/Info : Advanced Video Codec
Format_Profile : High@L4.1
Format_Settings_CABAC/String : Oui
Format_Settings_RefFrames/String : 4 images
CodecID : avc1
CodecID/Info : Advanced Video Coding
Duration/String : 36mn 2s
Source_Duration/String : 1h 45mn
BitRate/String : 2 000 Kbps
BitRate_Maximum/String : 8 264 Kbps
Width/String : 1 024 pixels
Height/String : 576 pixels
DisplayAspectRatio/String : 16/9
FrameRate_Mode/String : Constant
FrameRate/String : 59,940 Im/s
ColorSpace : YUV
ChromaSubsampling : 4:2:0
BitDepth/String : 8 bits
ScanType/String : Progressif
Bits-(Pixel*Frame) : 0.057
StreamSize/String : 516 Mio (32%)
Source_StreamSize/String : 1,47 Gio
Encoded_Library/String : x264 core 120 r2164 da19765
Encoded_Library_Settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=5 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=0 / threads=12 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=599 / keyint_min=59 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=abr / mbtree=1 / bitrate=2000 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
Encoded_Date : UTC 2012-02-29 01:04:53
Tagged_Date : UTC 2012-02-28 03:45:10

Audio
ID/String : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format_Profile : LC
CodecID : 40
Duration/String : 1h 45mn
BitRate_Mode/String : Variable
BitRate/String : 128 Kbps
BitRate_Maximum/String : 139 Kbps
Channel(s)/String : 2 canaux
ChannelPositions : Front: L R
SamplingRate/String : 48,0 KHz
Compression_Mode/String : Avec perte
StreamSize/String : 96,3 Mio (6%)
Encoded_Date : UTC 2012-02-28 03:44:30
Tagged_Date : UTC 2012-02-28 03:45:10

[rubberduck]

can anybody help ?

[Nettle]

Hello,

it's seems to be a fimware upgrade issue.

Hve you tried to verify if is possible to downgrade your TV firmware to the previous version?

Regards

[rubberduck]

unfortunately philips told me that they didn't advise me to downgrade my firmware

[Philips - Thomas]

Hi rubberduck

can you please upload an example vid so we can test it here?

Thanks
Thomas

[rubberduck]

thank you Thomas, i sent you a sample of the file by return mail

[rubberduck]

Hi Thomas, did you receive my sample video file that i sent you last april 11 ?

[rubberduck]

any suggestions on why my mp4s don't work anymore after update ?

[rubberduck]

?????