47PFL7606H/12 RC6 Codes

[jeroenV]

Dear Philips,

For programing URC universal remotes I use RC5 codes and translate them to Full Hex with IRCodeDocter. Unfortunatly IRCodeDockter does not support RC6 codes. I have all the command`s I need exept "Watch TV" So when I switched to HDMI 2 I need to switch back to "Watch TV" in order to watch tv! So can you please post the full HEX command on this topic for me, or even better; tell me what program can translate RC6 IR codes to full HEX?

Your help is much appreciated,

Jeroen

[jeroenV]

Any people reading this?

[Toengel]

Hi,

try MakeHex: http://www.remotecentral.com/cgi-bin...ip&area=pronto

Toengel@Alex

[jeroenV]

Did not work for me. I found most RC5 codes for my tv at http://www.supportforum.philips.com/...R-Remote-Codes
But I`m still looking for an RC5 command to go to stereo audio when HD Channel is showing, because of the philips audio bug for HD channels.

[Philips - Thomas]

Hi

RC6 for watch TV is:
000,159

Regards
Thomas

[jeroenV]

Hi

RC6 for watch TV is:
000,159

Regards
Thomas

Problem is, how to translate it to RC5? I need the HEX code to put in my universal remote.

[jeroenV]

Does anyone know if there is a sheet availible for controling Philips smart TV`s over IP? I know it is possible becouse Philips has an APP for their smart TV`s controlling your TV over ip with your iPhone.

[Toengel]

Hi,

take a look at: jointspace.sourceforge.net

Toengel@Alex

[jeroenV]

Thanks Toengel!

My last question, still looking for the RC5 or HEX code for Audio to Stereo !!

(HD channels are by default set to 5.1 audio, due the Philips sound issue on HD channels with Optical out I want to be able to go to Stereo audio with the press of one button on my universal remote)

[Toengel]

Hi,

don't know - but you can change the default of your TV to stereo. Look at the channel settings setup - somewhere you can setup the audio between standard (stereo) and extended (5.1).

Toengel@Alex

[jeroenV]

Hi,

don't know - but you can change the default of your TV to stereo. Look at the channel settings setup - somewhere you can setup the audio between standard (stereo) and extended (5.1).

Toengel@Alex

Thats one solution. But I have a 10k € audio installation behind my television, so I want to enjoy 5.1 when possible. Only on some HD Channels I have trouble with my audio, so a one press button on my remote to toggle from 5.1 to stereo would be a solution (especialy for my wife).