Remove messages, of course, to keep things simple I suppose?
The IP-EPG is predominantly a Dutch problem, what is the issue of some messages in Dutch?
Well then again in English:
Ziggo says it is a Philips software issue, and it has NOTHING to do with them controlling EPG info or something like that!
The trick to overcome the issue is to change to DVB-T and use a piece of wire as antenna, reinstall channels, don't just update them. After reinstalling the channels, choose network EPG. You should see the IP EPG by now. Dhange back to DVB-C. Now the IP-EPG should still be available.
The fact that the workaround works implies indeed that it is a Philips software issue, otherwise Ziggo would start blocking IP-EPG directly after reconnecting the coax cable.....
I think it is all a licencing issue... TVTV sells licences for their content seperately for different countries AND diffenent tuner types... but this is my speculation...
If it would be licencing then the workaround using DVB T should not work either. After executing the workaround I do enjoy the IP EPG while using Ziggo
Philips Moderator. In one of these posts i explained in detail how the IP EPG can be used in combination with DVB-C. This can be very useful for Onsbrabantnet users / Onsnet users in Eindhoven region where a lot of Philips TVs are bought, since Eindhoven is the home-town of Philips. Yes it was in dutch, but I received many thanks from other users. The Philips service people however are not able to provide this solution! So I expect that you will be receiving even more complaints about this from now on !
Originally Posted by Philips
maybe you are so kind to post the workaround in English again...
Of course I want to post the workaround again, but I thought I did not keep a copy. Today I remembered that I sent this also to Philips Consumer Care and found a copy in my sent box. So here it is. I use my TV with Dutch menu, so I am not sure of all the translations to english menu text.
1) Starting point is a TV with DVB-C channels installed. Tried to use IP-EPG, but this did not work.
2) Unplug the antenna cable. Only leave a short coax cable in the TV (i used the cable that i use to connect to my HD recorder)
3) Set the channel location to DVB-T (config>channel settings>install channels>antenna/cable>antenna DVB-T)
4) Install channels from DVB-T (config>find channels>new channel installation>DVB-T)
5) Now set the EPG location to network (config>TV settings>preferences>program guide>network
6) Go to the Program Guide and let it find program information
(if it does not work try to set EPG location to channel and back to network:
config>TV settings>preferences>program guide>channel,
config>TV settings>preferences>program guide>network)
7) Now set the channel location back to DVB-C (config>channel settings>install channels>cable DVB-C)
8) Update channels (config>find channels>update channels)
This workaround worked fine for me and some other people.
This is a joke ??? All these procedures to get it working??? Come on! Philips should solve it right away instead of doing this to their customers! This should be fixed by Philips !
Originally Posted by Niels
A few minutes and it functions perfectly! So why should this be a joke?
Originally Posted by Erikrijnders
Thank you Niels.
:-(((( My IP EPG does not function anymore. I get a white screen with something like "info not available". So we're back to where we started: the old EPG from Ziggo. I'm not gonna start all over again with a piece of wire and reinstall IP EPG. Too much trouble if it's not a permanent tweak.
Edit: The remark of Toengel below is correct. I had already switched back to the normal EPG, but being curious and thus trying once more, IP EPG works again to my suprise!
So from pretty disappointing I must restate my conclusion to pretty good tweak! After executing the procedure once you can even switch between the two EPG's back and forth.
Last edited by Joop; 05-18-2011 at 06:46 PM.
Reason: Adjusted conclusion
Correct Alex. See remark in this link. Thanks.
Originally Posted by Toengel
Originally Posted by Philips
IP-EPG STILL doesnot work with DVB-C /CI+ AND Ziggo in the Netherlands. No fix at all!!! Philips do you read what customers are writing here?????????????
Philips answers please! Why is it so quite. You donot know lies to hide behind anymore???
Because the Ziggo-certification is not the bottleneck (as stated by Ziggo!!!). Even the 2011-certifies tv's have the IP-EPG feature
Well?? Is there anyone off Philips reading AND WANTING TO REACT??? When is this problem solved for Ziggo-users woth CI+ and a 2010 model????
Tags for this Topic