Your experiences with FW v133.x.x for 6xx7, 7xx7 and 8xx7 series (2012 models)

[Philips - Benedickte]

Hi all,

Please share your experiences with this new SW version here in this topic. Channeling your input will make it easier for users to search and find relevant info.

Remarks
- Due to the global IT structure, there might be a delay in the uploading/synchronising of new SW releases (and their release notes). Please, have a little patience if you cannot immediately see the new files on the support web pages and try 1 or 2 days later.
- IMPORTANT: After upgrading your TV, it is necessary to perform a "cold start": after the TV is running again (after the update), shut down the TV, wait 2 minutes (till all components are shut down), unplug the TV from the mains (pull power cord) for a few minutes before starting again.
- WARNING: Never downgrade from 133.x.x. back to 108.8.x! Version 132.5.1 contains a new Standby-Software which is not compatible with the firmware 108.8 (108.8 does not contain the old Standby-Software). If you downgrade, your TV won't start anymore and you need a service intervention!


Release Notes:

· Smart TV home page with more functional apps and icons.
· Smart TV Mediastores operational.
· Smart TV IP EPG and PVR enabled.
· No video when leaving EPG, Smart TV solved.
· Channel copy from TV to USB and vice versa operational, with improved speed.
· Major stability improvement.
· HBB TV (Crashes solved, Mediathek playback OK, functional issues OK)
· Picture Quality. (2D Dimming backlight improved, Macro block problem solved)
· CI+ Authentication issue with credentials solved.
· Authentication issues with Alphacrypt CAM card and ORD Cam card solved.
· Content Browser: Navigation speed improved, Playback OK, Trick modes OK.
· Speed improvement for zapping in DVB-C and DVB-S.
· Speed improvement in EPG navigation (EPG lists).
· Speed improvement in Boot Time.
· Certification solutions for UPC, Ziggo, Risk TV, Soarview, Canal Digital, DTG.
· BBC iPlayer operational.
· Some Skype bugs were solved (adding Contacts, autologin).
· DVB-S Installation problems with multiple satellites solved.
· Switching between DVB-S with HBB-TV and DVB-C could lead to blocked set – solved.
· Sometimes no logo’s visible in DVB-S or after update – solved.
· Sometimes Jittering in LVDS sets – solved.
· Sporadic white bar in right corner of LVDS sets – solved.
· Connection problems with Smart TV server solved.
· No sound after wake up HTS9520 solved.
· DLNA files playback problems solved.
· Channel sorting bugs solved.
· PVR bugs solved. (multiple recording overnight)
· HBB-TV can be used via the Blue key in France.

UPDATE:

QF1EU_0.133.4.0 (Date published: 2012-08-27)
· Picture improvements.

UPDATE 2

QF1EU_0.133.5.0 (Date published: 2012-09-03)
• Solution for analog services not available in channel grid.


! Note:Once the software upgrade is complete, you need to disconnect the power cable from the
power outlet. Wait one minute then reconnect it. After that you can start your TV in the usual way.


Best regards,
Benedickte

[kober]

First impressions:
- false new HDMI/YPbPr devices still detected, probably even more frequently
- still problems with dynamic backlight - some "blocks" are lighter than others, now it seems that it's just on a level of single block, not a bigger area as before. Probably related to switching from Smart TV back to normal TV.
- HbbTV with Czech TV works finally!

[Philips - Benedickte]

First impressions:
- false new HDMI/YPbPr devices still detected, probably even more frequently
- still problems with dynamic backlight - some "blocks" are lighter than others, now it seems that it's just on a level of single block, not a bigger area as before. Probably related to switching from Smart TV back to normal TV.
- HbbTV with Czech TV works finally!

Hi Kober.

Could you please provide us with a picture showing us these "blocks" you are experiencing?

Thank you.
Best regards,
Benedickte

[Julian]

Benedickte,
I live in Belgium and installed a 42PFL6057H/12 in my dad’s house, he is 90!
The reason was that all his children could talk with him using Skype.
The TV had SW. version 1EU-0.108.5.0 when we bought it on 08 Aug 12. Two weeks ago, the latest SW was updated, but I only found out last Friday during a new!! update, that the latest SW was 1EU-0.132.5.3 So I think that I have now the 1EU-0.133….?
I think that updates in Belgium are later than other countries.
Now we can Skype and the log-in data are not lost anymore when you switch off the TV.
Accepting a Skype call during my dad is watching a program works fine but returning after ending that call seems a hell of job for an old person and also for me. The only easy way for my dad is to switch the TV off and on again.
Suggestion for improvement: when an incoming Skype call was accepted (by pressing the OK-button) than to end this call… the message should be: “to end this call and return to your program press OK” whatever the program was. The reason that “returning to watch TV” is not acceptable is that in Belgium most of the smart-TV (HD) users watch their program using the HD-recorder delivered by the provider or Cable Company. Believe it or not but in Belgium, all users watch their programs via the HD recorder! And yes, they all have/need two remote controls! So older people they don’t understand it although the like Skype video conversations!
Thanks in advance;
Julian

[tamasp]

First impressions:
- false new HDMI/YPbPr devices still detected, probably even more frequently
- still problems with dynamic backlight - some "blocks" are lighter than others, now it seems that it's just on a level of single block, not a bigger area as before. Probably related to switching from Smart TV back to normal TV.
- HbbTV with Czech TV works finally!

I also still have lighter scenes and darker scenes due dynamic backlight, i don't have stable picture see my earlier post "screen to bright"in other topic Üser Interface"

Tomorrow comes ecare...

[Rustem]

When viewing the video service YouTube begins to slow down somewhere after 1 minute. And if you click OK again to show normally starts about one minute. Then again, the brakes!
With the internet there is no problem!

[pepescratch]

Hi, I just installed this update on my television and now I can not change the language of the audio on my mkv files (usb). This is unfortunate but solvable. I can not change the order of languages ​​in all my mkv files by an error in the firmware upgrade.

I never could put the subtitle of my mkv files (usb). Could be achieved with an update? This question is not as important to me but the audio related questions ...

Thank you very much and greetings from Spain.

[Ladman]

Hi! I just bought my 46PFL8007 this week and updated to the new software yesterday.

-As pepescratch mentioned, the language in mkv files, that was automatically put to English before the update, can now NOT be changed in any way.
-After the update the left two corners of the screen seem a bit lighter than the rest. Did not have a conformity issue before.
-SKY receiver and BD Player are still recognized as new devices almost ever other time I turn on the TV. Always depends on the order you turn on your other devices. e.g. TV then receiver OK. Receiver then TV --> new device recognized.
-Sounds problem -> Sky receiver -> when switching from a HD to an SD channel so from Stereo to Dolby Digital signal a fairly loud sweaky noise is noticable in the speakers. No matter if ARC or optical.
Never had this problem before.
-when switching back from Network view to HDMI the TV turned off twice.

-other stability issues I was quite fed up with seem to be solved
-speed inprovement are noticable

The following things are not bugs but would be nice to have (or maybe I just couldn't find out how to)

-reorder the input list
-a discrete IR code list for HARMONY ONE support!!
-switch the HELP and SETUP buttons in the home menu. As we seem to do a lot of troubleshooting it be nice to have the most used menu entry listed first.

I believe this is it for now. In case I stumble upon more things I'll let you know.
All the best and thx for trying to solve the problems as quickly as possible.

[Toengel]

-a discrete IR code list for HARMONY ONE support!!

Hi,

try: http://www.supportforum.philips.com/...ull=1#post7254

Toengel@Alex

[Ladman]

@Toengel - thx for the info

2 more things I just saw.

- When watching a file over the network option: When I change the picture settings during playback there is a flickering block in the menu. --> you can see the actual picture blur through the menu
-Furthermore the picture changes I made to the profile will again be gone as soon as the file stops playing. This happened to me twice. Tried to recreate. Might have been a freak thing tho.

[majorusa]

Hi.
I tested the firmware for about eight hours on the 42PFL6007K. The good things first:
- looks that the PVR issue that I was experiencing before it was solved. The TV worked with the HDD attached and we even used it for time-shift without any issue.
- the motion in the picture is better but still macroblocks appear when the image moves quickly.
- the corruption in the subtitles in TV mode was solved

The not so good:
- in 3D the flickering of the fine textures is present
- when changing from Smart TV to TV the Auto zoom does not work anymore. In order to fix it you have to change to another source and revert.
- the picture in 3D stutters from time to time with the HDNM on. This happened especially in the smoke pictures in HUGO 3D Bluray but I was experiencing it in other movies to and in HD pictures.
- the picture stutters more when HDNM is set to minimum in regular HD pictures.

This is for now. I will test it more and post the findings.

[Brakius]

I update the 55/8007 with this firmware. Some new problems:

- sometimes the TV does not want to go on (happen in three days 4 times!), power off solved the problem

Movie: http://www.youtube.com/watch?v=4CbPM...ature=youtu.be

- when watching TV format 1080i/50 sometimes left a white line appear when picture format configuration is "not scale", when changing this to other setting, white line is disappearing

[yreiter]

when connecting extreamer with hdmi - no sound.

[tamasp]

when connecting extreamer with hdmi - no sound.

Try to downsample to stereo, the tv wont accept hd sound. I only can use my hdi dune on my tv, because it can downsample.
Also my oppo BD-95 wont give sound only through my receiver.

Peter

[yreiter]

Tnx Peter. I don't think that's the problem. I attached the same streamer to old Philips tv and it worked. I also tried to play all different files like simple mp3. Didn't work every time regardless of file. Even the sound of the tones inside the streamer it didn't recognize. I almost confident it's a bug. Connecting my cable and computer with HDMI cables worked. It's just the streamer.