HDMI no video signal problem

[RStopar]

Hi
i´ve connected my tv to computer via hdmi cable....so...when my tv is off my computer recognize it....but when i turn my tv on then my computer dont recognize it enymore...and tv says no video signal...

Can someone help me please...
P.S:Sorry about my english...

[Philips - Benedickte]

Hi
i´ve connected my tv to computer via hdmi cable....so...when my tv is off my computer recognize it....but when i turn my tv on then my computer dont recognize it enymore...and tv says no video signal...

Can someone help me please...
P.S:Sorry about my english...

Hi RStopar

Welcome to the forums.

I would advise you that when you turn your TV on, go into the screen settings on your PC, press detect and select the TV.
Also make sure the Resolution is set to one of the following:
Display resolutions
Computer formats - HDMI
(Resolution - refresh rate)

640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60 Hz
1600 x 1200 - 60 Hz
1920 x 1080 - 60 Hz

As the TV supports 1920 x 1080 - 60 Hz, I would advise you to use this.

You can also see how to connect here.

On the Tv use Picture format Unscaled, and Put TV in PC mode( Menu > Setup > TV settings > Picture, then press OK. Find PC mode and press ok )

Please also make sure you have the latest software version on the TV ( 91.0)

If there is anything else, don't hesitate to come back.

Best regards,
Benedickte

[RStopar]

Hi
I´ve done all that but it still doesent work.....and if my TV is on, my computer doesen´t detect any tv or screen..
but if i turn my tv off then my comuter detect my tv...

[Philips - Benedickte]

Hi
I´ve done all that but it still doesent work.....and if my TV is on, my computer doesen´t detect any tv or screen..
but if i turn my tv off then my comuter detect my tv...

Hi RStopar.

Thank you for this information.

Have you added the PC as a device on the TV? Is it added as a PC? If so. Try to remove this from the menu.
Try turning PC mode on/off.
If neither of those work, please try to add PC as a Blu ray player (remember to remove the device as a PC from TV first, so you got the HDMI input free).

Best regards,
Benedickte

[RStopar]

Hi
Thank you for responding.....I´ve tried all that but it still doesent work....it till say "no video signal"...

[Philips - Benedickte]

Hi
Thank you for responding.....I´ve tried all that but it still doesent work....it till say "no video signal"...

Hi Rstopar.

I would advise you to contact your local customer service.

Best regards,
Benedickte